Panasonic KXFPG378 KXFPG378 User Guide - Page 71
Basic features, Setting the Quick Setup
View all Panasonic KXFPG378 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
8.3 Basic features {#}{0}{0} Setting the Quick Setup QUICK SETUP PRESS SET L Press {SET} 2 times before pressing the direct command button. See page 21 for details. {1} "TAM/FAX" (default) {2} "DIST. RING" {3} "TEL ONLY" {4} "FAX ONLY" {#}{0}{1} Setting the date and time SET DATE & TIME PRESS SET L Enter the date and time using the dial keypad. See page 29 for details. {#}{0}{2} Setting your logo YOUR LOGO PRESS SET L Enter your logo using the dial keypad. See page 30 for details. {#}{0}{3} Setting your fax number YOUR FAX NO. PRESS SET L Enter your fax number using the dial keypad. See page 31 for details. {#}{0}{4} Printing a confirmation report CONFIRM REPORT MODE=ERROR [±] To print a confirmation report for fax transmission results (page 48). {1} "ON": A confirmation report will be printed after every transmission. {2} "OFF": Confirmation reports will not be printed. {3} "ERROR" (default): A confirmation report will be printed only when fax transmission fails. {#}{0}{6} Changing the ring setting in FAX ONLY mode FAX RING COUNT RINGS=3 [±] To change the number of rings before the unit answers a call in FAX ONLY mode. {1} "1" {2} "2" 8. Programmable Features {3} "3" (default) {4} "4" {#}{0}{6} Changing the ring setting in TAM/FAX mode TAM RING COUNT RINGS=2 [±] To change the number of rings before the unit answers a call in TAM/FAX mode. See page 53 for details. {2} "2" (default) {3} "3" {4} "4" {5} "5" {6} "6" {7} "7" {0} "TOLL SAVER" Note: L You can also program this feature with the handset (page 77). {#}{1}{0} Changing the maximum recording time for incoming messages RECORDING TIME MODE=3 MIN [±] {1} "1 MIN": 1 minute {2} "2 MIN": 2 minutes {3} "3 MIN" (default): 3 minutes {0} "GREETING ONLY": Only plays the greeting message. Note: L If you select "GREETING ONLY", the unit will answer a call with the greeting message, and then hang up. The unit will not record any incoming messages. L You can also program this feature with the handset (page 77). {#}{1}{1} Setting the remote operation ID REMOTE TAM ID ID=11 1. Press {MENU}. 2. Press {#}, then {1}{1}. 3. Enter a 2-digit number (00-99). L The default ID is "11". 4. Press {SET}. 5. Press {MENU}. Note: L You can also program this feature with the handset (page 77). 69