Philips CDR800 User manual - Page 21
Programming - cdr 800 audio recorder 3 cd changer
View all Philips CDR800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
xp CDR 800/17.1 eng. 25-07-2001 15:12 Pagina 18 English Programming Programming track numbers - A program can be composed of tracks in both changer and recorder deck. - Any track can be stored more than once with a maximum of 99 tracks. - If you exceed the maximum of 99 tracks the display shows PROGRAM FULL. 1 Load the desired disc(s) in the disc tray(s). 2 Select the first required disc by pressing CD 1, CD 2, CD 3, or CDR. 3 Press PROGRAM. ➜ PROGRAM starts blinking and PROGRAM is displayed. 4 Rotate the ¡ EASY JOG ™ control to select the required tracknumbers on the selected disc and store each track by pressing YES. For normal Audio CD(RW) discs only: 0 If you wish to store all tracks of the selected disc, rotate the ¡ EASY JOG ™ control to select ALL and press YES to store the complete disc in the memory. ➜ The number of programmed tracks (STEP), PROG and the total program time are displayed. 5 Select and store all required CD's and/or tracks in the same way. 6 Press PROGRAM to end programming. ➜ PROGRAM stays shown and the program is currently available. Changing a program 1 If necessary press STOP 9. 2 Press PROGRAM to enter Program mode. Erasing tracks 3 Select the tracknumbers you wish to erase with 5 or 6 and erase each number by pressing NO. ➜ CLEARED is displayed briefly. ➜ The next programmed track number will move up to this position and is displayed together with the step number and the total program time. Adding tracks 3 Rotate the ¡ EASY JOG ™ control to select the tracknumbers you wish to add to the program and store each track by pressing YES. ➜ The number of programmed tracks (STEP), PROG and the total program time are displayed. 4 Press PROGRAM to end programming. ➜ PROGRAM stays shown and the program is currently available. Clearing a program 1 If necessary press STOP 9. 2 Press NO. ➜ CLEAR PROG ? is displayed. 3 Press YES to clear the program. ➜PROG CLEARED will be displayed and PROGRAM goes off. Making a program for recording If the program is used for recording only tracks from discs in the changer should be programmed. Also see chapter "Recording a program". 18