Philips CDR800 User manual - Page 29
A-B editing on CD changer only
View all Philips CDR800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
xp CDR 800/17.1 eng. 25-07-2001 15:12 Pagina 26 English Special features A-B editing (on CD changer only) Clearing the A-B edit 1 Press NO during stop. ➜ CLEAR A-B ? is displayed. 2 Press YES to clear the markers. ➜ The markers A-B are cleared. Note: If you open the CD changer tray the A-B edit is deleted. You can create a "track" by marking a passage of music within one track on the current disc.This new "track" can be used for recording or playing.The minimum track length is 4 seconds. Note:You can only make an A-B edit for a normal Audio CD(RW). 1 Press A-B EDIT on the set. ➜ EDIT TRACK starts blinking, TRACK and the current track number ? are displayed. 2 Rotate the ¡ EASY JOG ™ control until the desired track number is displayed. 3 Press YES to confirm the selected track. ➜ FROM A = XX : XX and the track time will be displayed. The first 4 seconds of the track will be played continously.The initial position of marker A is always the start of the chosen track. 0 To fast forward to the desired start position press 5 or 6 on the set. 0 To fine tune the position then rotate the ¡ EASY JOG ™ control. 4 Press YES or A-B EDIT to confirm the position of marker a. ➜ TO B = XX : XX and the new "track" time will be displayed.The first 4 seconds before marker position B until marker position B will be played continously.The initial position of marker B is always the position of marker A plus 4 seconds. 0 To fast forward to the desired stop position press 5 or 6 on the set. 0 To fine tune the position rotate the ¡ EASY JOG ™ control. 5 Press YES or A-B EDIT to confirm the marked passage. ➜ EDIT TRACK is shown, A-B and the track edit time are displayed. ➜ The new "track" will be stored. 0 Press PLAY/PAUSE 2/; to play the "track". 0 Press RECORD to record the "track" (also see "Recording"). Note: A-B EDIT can also be pressed during play.The Track Edit procedure will then start from the position where A-B EDIT was pressed. 26