Philips DVD765SA User manual - Page 19

Rear Panel 19 AC Power cord Connect to a standard AC outlet to supply power to the Player. COAXIAL (Digital Audio Out) Connect an optional audio coaxial digital cable here and to the coaxial digital Audio In jack of a Stereo. Details are on page 14. OPTICAL (Digital Audio Out) Connect an optional audio optical cable here and to the optical digital Audio In jack of a Stereo. Details are on page 14. When the OPTICAL jack is not in use, replace its protective cap. MULTICHANNEL AUDIO OUT If you have a multiple channel Receiver (one that has connections for six speakers), connect the MULTICHANNEL AUDIO OUT jacks on the Player to the corresponding In jacks on the Receiver. Details are on page 15. DIGITAL AUDIO OUT PCM-MPEG2- Dolby Digital-DTS COAXIAL OPTICAL MULTICHANNEL AUDIO OUT LEFT SURROUND CENTER LEFT FRONT L L 1 R R 2 RIGHT SUBW RIGHT SURROUND FRONT AUDIO CVBS Pr/Cr Pb/Cb Y OUT VIDEO OUT S-VIDEO PROGRESSIVE INTERLACE AUDIO OUT (Left/Right) Connect the supplied red and white audio cables here and to the Audio In jacks of a television or Stereo. Details are on pages 9-12. CVBS (Video Out) Connect the yellow video cable (supplied) here and to the TV's Video In jack. Details are on page 9. Pr/Cr Pb/Cb Y (Video Out) Connect component video cable here and to the Component Video In jacks of a TV. Details are on page 11. Or, if your TV has Progressive Scan, connect these jacks to the Progressive Scan In jacks on the TV. Details are on page 12. S-VIDEO (Video Out) Connect an S-Video cable here and to the S-Video In jack of a television. Details are on page 10. PROGRESSIVE/INTERLACE switch Set this switch to PROGRESSIVE only when connecting the Player to Progressive Scan In jacks on your TV. Set this switch to INTERLACE in all other cases. Details are on pages 9-12. Caution • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may damage the unit permanently.