Pioneer 607CMX Technical Manual - Page 150

Integrator Mode 7) SUB VOLUME Setting This item is for adjusting the audio input level for each input. This is useful when adjusting the level between different sources, for example a DVD player and a PC. After muting the audio before hand, enter the integrator mode and perform the adjustment. 1 Enter the integrator mode. (Refer to section 5.4.1, "About the Integrator Mode" (pg. 142).) 2 Select 'SETUP'. 3 Place the cursor on 'SUB VOLUME' then press the [SET] button. Screen 3 I N T E G R ATO R INPUT1 PICTURE SCREEN B RT. E N H A N C E SUB VOLUME SETUP OPTION : OFF : 20 SET ENTER MENU EXIT 4 Perform the adjustment. Use the [2/3] buttons on the remote control or the maincontrol panel to change settings. Press the [SET] button to return to screen 3. Screen 4 Each item: 0 to 20 (initial value: 20) SUB VOLUME SET SET : 20 MENU EXIT Performing adjustment in the following order is effective. 1. VOLUME (normal-operation mode): Raise the volume to the actual operating condition. 2. SUB VOLUME (integrator mode): Adjust the input with high volume to match the input with low volume. 1 AUDIO INPUT (INPUT1) Stereo mini jack 2 AUDIO INPUT (INPUT2) Stereo mini jack 3 AUDIO INPUT (INPUT3/4) #1 (INPUT3) #2 Pin jack 4 AUDIO INPUT (INPUT4) #2 Pin jack 5 AUDIO INPUT (INPUT5) # Pin jack INPUT1 SUB VOLUME INPUT2 SUB VOLUME INPUT3 SUB VOLUME INPUT4 SUB VOLUME INPUT5 SUB VOLUME # : Applicable only when a PDA-5003/PDA-5004 is installed. #1: Applicable only when a PDA-5003 is installed. #2: Applicable only when a PDA-5004 is installed. INPUT SELECTOR POWER AMPLIFIER VOLUME Audio block diagram (concept diagram) 150