Pioneer 607CMX Technical Manual - Page 56

Video Card: PDA-5003/PDA-5004 When connecting to ANALOG RGB IN (INPUT1) ANALOG RGB OUT (D-Sub) INPUT1 ANALOG RGB IN (D-Sub) Connection of G ON SYNC analog RGB source Make G ON SYNC connections for a personal computer with output that has the synchronization signal layered on top of the green signal. When connecting to ANALOG RGB IN (INPUT1) ANALOG RGB OUT (D-Sub) INPUT1 ANALOG RGB IN (D-Sub) Connect the cable corresponding to the shape of the input terminal on the display and the personal computer's output terminal. Secure by tightening the terminal screws on both units. On-screen setup is necessary after connection. Note Depending on the type of computer model being connected, a conversion connector or adapter etc. provided with the computer or sold separately may be necessary. For details, please read your PC's instruction manual or consult the maker or nearest dealer of your computer. When connecting to ANALOG RGB OUT (INPUT1) On-screen setup is necessary after connection. When connecting to ANALOG RGB (INPUT5) [Connections for PDA-5003] ANALOG RGB INPUT5 G(ON SYNC) B R HD (H/V SYNC) VD ANALOG RGB OUT (D-Sub) INPUT1 ANALOG RGB IN (D-Sub) To an external monitor With the Plasma Display, it is possible to output the video signal to an external monitor or other component from the ANALOG RGB OUT (INPUT1) terminal. Note A video signal will not be output from the ANALOG RGB OUT (INPUT1) terminal when the main power of this unit is off or in standby. On-screen setup is necessary after connection. Note When making G ON SYNC connections, do not make any connections to the VD or HD jacks. If connections are made, the picture may be not displayed normally. 56