Pioneer 607CMX Technical Manual - Page 204

RS-232C Adjustment 2) Obtaining Integrator/PICTURE information Sequence Data Content 1 STX 2 Command echo-back 3 CONTRAST 4 BRIGHTNESS 5 C,DETAIL R (RED) 6 C,DETAIL Y (YELLOW) 7 C,DETAIL G (GREEN) 8 C,DETAIL C (CYAN) 9 C,DETAIL B (BLUE) 10 C,DETAIL M (MAGENTA) 11 H.ENHANCE 12 V.ENHANCE 13 COLOR 14 TINT 15 SHARPNESS 16 Main input function 17 Main screen size information 18 Check sum 19 ETX Size 1 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 1 Byte 2 Byte 1 Byte Note 1) If the signal type is not confirmed, dummy data is output. Note 2) During video signal input, dummy data is output. Note 3) During PC signal input, dummy data is output. Remarks 02hex QPI (fixed) 000 to 255 Note 1) 000 to 255 Note 1) 000 to 060 Note 1) 000 to 060 Note 1) 000 to 060 Note 1) 000 to 060 Note 1) 000 to 060 Note 1) 000 to 060 Note 1) 000 to 015 Note 1), Note 2) 000 to 015 Note 1), Note 2) 000 to 127 Note 1), Note 3) 000 to 060 Note 1), Note 3) 000 to 015 Note 1), Note 3) Same as item 9 of QST commands Same as item 11 of QST commands 03hex 3) Obtaining integrator/WHITE BALANCE information Sequence Data Content 1 STX 2 Command echo-back 3 R.HIGH 4 G.HIGH 5 B.HIGH 6 R.LOW 7 G.LOW 8 B.LOW 9 Main input function 10 Main screen size 11 Check sum 12 ETX Size 1 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 1 Byte 2 Byte 1 Byte Remarks 02hex QWB (fixed) 000 to 255 Note 1) 000 to 255 Note 1) 000 to 255 Note 1) 000 to 255 Note 1) 000 to 255 Note 1) 000 to 255 Note 1) Same as item 9 of QST commands Same as item 11 of QST commands 03hex Note 1) If the signal type is not confirmed, dummy data is output. 4) Obtaining integrator/SCREEN information Sequence Data Content 1 STX 2 Command echo-back 3 H.POSITION 4 V.POSITION 5 H.SIZE 6 V.SIZE 7 CLOCK 8 PHASE 9 Main input function 10 Main screen size information 18 Check sum 19 ETX Size 1 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 3 Byte 1 Byte 2 Byte 1 Byte Note 1) If the signal type is not confirmed, dummy data is output. Note 2) During DVI or video input, dummy data is output. Remarks 02hex QPS (fixed) 000 to 255 Note 1) 000 to 255 Note 1) 000 to 064 Note 1) 000 to 064 Note 1) 000 to 255 Note 1), Note 2) 000 to 031 Note 1), Note 2) Same as item 9 of QST commands Same as item 11 of QST commands 03hex 204