Pioneer P90HDD Owner's Manual - Page 18

Tuner Display and indicators FORM 1 q we r FORM 2 q e t wt r qBand wLOC indicator ePreset number rFrequency tStereo indicator Basic operation 1. Press SOURCE to select the tuner. Press SOURCE until "Tuner" appears. 2. Press VOLUME to extend the VOLUME outward. • When you press VOLUME, it extends outward so that it becomes easier to turn. To retract VOLUME, press it again. 3. Turn VOLUME to adjust the volume. 4. Press BAND to select the desired band. Press BAND repeatedly to switch between the following bands: FM-1 = FM-2 = FM-3 = AM 5. Press 2 or 3 to tune in to a station. The frequencies move up or down step by step. • If you press and hold 2 or 3 for about one second and release, you can perform seek tuning. Seek tuning lets you skip broadcasting stations until a broadcast strong enough for good reception is found. • If you press and hold 2 or 3, you can skip broadcasting stations. Seek tuning starts as soon as you release the button. Note: • The stereo indicator "" lights when a stereo sta- tion is selected. Storing and recalling broadcast stations If you press any of the buttons 1 - 6, you can easily store up to six broadcast stations for later recall. Storing broadcast stations 1. Press NEXT to display "1" - "6". Press NEXT until "1" - "6" appears. 2. When you find a station that you want to store in memory, press and hold any of the buttons 1 - 6 until the preset number stops flashing. The station is stored in memory under the selected button. Note: • Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. 17