Pioneer P90HDD Owner's Manual - Page 64

Warning

Get Pioneer P90HDD - DEH Radio / CD PDF manuals and user guides
UPC - 012562575896
View all Pioneer P90HDD manuals
Add to My Manuals
Save this manual to your list of manuals

Page 64 highlights

Audio Adjustments 3. Turn the ignition switch to ON or ACC. If the car's air conditioner or heater is turned on, turn it off. Noise from the fan in the air conditioner or heater may prevent correct auto-equalizing. • Press SOURCE to turn the source on if this product is turned off. 4. Select the position for the seat on which the microphone is placed. Refer to "Using position selector" on page 58. • If no position is selected before you start auto-equalizing, "FL" is selected automatically. 5. Press and hold SOURCE to turn the source off. 6. Press and hold 2 to enter the autoequalizer measurement mode. • When the source is off, you can check the location of " 2" by turning on the feature demo. 7. Plug the microphone into the microphone input jack on this product. Remove the microphone input jack cap and plug in the microphone. 9. Get out of the car and close the door within 10 seconds when the 10-second count-down starts. The measurement tone (noise) is output from the speakers, and auto-equalizing (acoustic characteristics measurement and compensation) begins. • When all speakers are connected, auto- equalizing is completed in about four minutes. • To cancel auto-equalizing part way through, press any button. 10.When auto-equalizing is completed, "Complete" is displayed. When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to "Understanding auto-equalizing error messages" on page 73.) 11.Press any button to cancel the autoequalizer mode. 12.Store the microphone and microphone input jack carefully in the safe place. Store the microphone carefully in the glove compartment or other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. WARNING: • After attaching the microphone input jack cap, store it in a safe place. If the microphone input jack cable tangles with the accelerator pedal, it can hamper driving and be extremely dangerous. 8. Press A.EQ to start the auto-equalizing. 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
Audio Adjustments
3.
Turn the ignition switch to ON or ACC.
If the car’s air conditioner or heater is turned
on, turn it off. Noise from the fan in the air
conditioner or heater may prevent correct
auto-equalizing.
• Press SOURCE to turn the source on if
this product is turned off.
4. Select the position for the seat on which
the microphone is placed.
Refer to “Using position selector” on page
58.
• If no position is selected before you start
auto-equalizing, “FL” is selected automati-
cally.
5. Press and hold SOURCE to turn the
source off.
6.
Press and hold
2 to enter the auto-
equalizer measurement mode.
• When the source is off, you can check the
location of “
2” by turning on the feature
demo.
7.
Plug the microphone into the microphone
input jack on this product.
Remove the microphone input jack cap and
plug in the microphone.
8.
Press A.EQ to start the auto-equalizing.
9.
Get out of the car and close the door
within 10 seconds when the 10-second
count-down starts.
The measurement tone (noise) is output
from the speakers, and auto-equalizing
(acoustic characteristics measurement and
compensation) begins.
• When all speakers are connected, auto-
equalizing is completed in about four min-
utes.
• To cancel auto-equalizing part way
through, press any button.
10.When auto-equalizing is completed,
“Complete” is displayed.
When correct measurement of car interior
acoustic characteristics is not possible, an
error message is displayed. (Refer to
“Understanding auto-equalizing error mes-
sages” on page 73.)
11.Press any button to cancel the auto-
equalizer mode.
12.Store the microphone and microphone
input jack carefully in the safe place.
Store the microphone carefully in the glove
compartment or other safe place. If the
microphone is subjected to direct sunlight for
an extended period, high temperatures may
cause distortion, color change or malfunc-
tion.
WARNING:
• After attaching the microphone input jack cap,
store it in a safe place. If the microphone input
jack cable tangles with the accelerator pedal,
it can hamper driving and be extremely dan-
gerous.
63