Pioneer P90HDD Owner's Manual - Page 74
Understanding auto-equalizing error messages
UPC - 012562575896
View all Pioneer P90HDD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Additional Information Understanding auto-equalizing error messages When correct measurement of car interior acoustic characteristics is not possible using the autoequalizer, an error message may appear on the display. If an error message appears on the display, refer to the table below to see what the problem is and the suggested method of correcting the problem. After checking, try again. Display ERROR CHECK MIC ERROR CHECK SPEAKER ERROR CHECK SYSTEM Cause Microphone is not connected. The microphone cannot pick up the measuring tone of the front and rear speakers. The surrounding noise level is too high. Remedy Plug the supplied microphone securely into the jack. Confirm that the speakers are connected correctly. Correct the input level setting of the power amp connected to the speakers. Set the microphone correctly. Stop your car in a place that is as quite as possible, and switch off the engine, air conditioner or heater. Set the microphone correctly. 73