Pioneer P90HDD Owner's Manual - Page 20

Built-in CD Player Display and indicators FORM 1 q w e r FORM 2 q w r e t qSource name wTrack number eDisc title rPlay time tTrack title Basic operation The built-in CD player plays one standard 12 cm or 8 cm (single) CD at a time. Do not use an adapter when playing an 8 cm CD. 1. Press OPEN to open the front panel. 2. Insert a CD into the CD loading slot. CD loading slot 4. Press VOLUME to extend the VOLUME outward. • When you press VOLUME, it extends outward so that it becomes easier to turn. To retract VOLUME, press it again. 5. Turn VOLUME to adjust the volume. 6. Press 2 or 3 to select a track. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. • If you press and hold 2 or 3, you can per- form fast forward or reverse. 7. Press OPEN and then press CD EJECT to eject the CD. • Be sure to close the front panel after removing the CD. WARNING: • Do not use with the front panel left open. If the front panel is left open, it may result in injury in the event of an accident. Note: • You can select CD as the source by pressing SOURCE when a disc is loaded in this product. • When the front panel is open, multi-function but- tons are not available. • Do not insert anything other than a CD into the CD loading slot. • A CD left partially inserted after ejection may incur damage or fall out. • If a CD cannot be inserted fully or playback fails, make sure the recorded side is down. Press the CD EJECT and check the disc for damage before reinserting it. • If the built-in CD player cannot operate properly, an error message (such as "ERROR-12") appears on the display. Refer to "Understanding built-in CD player error messages" on page 74. 3. Close the front panel. CD EJECT button 19