Pioneer P90HDD Owner's Manual - Page 24

MP3 Play Display and indicators FORM 1 q we r t FORM 2 q y rw y tu qSource name wMP3 indicator eBit rate indicator rTrack number tFolder name yPlay time uFile name Basic operation The built-in CD player can playback MP3 files recorded on CD-ROM discs. (See page 71.) 1. Press OPEN to open the front panel. 2. Insert a CD-ROM into the CD loading slot. CD loading slot 3. Close the front panel. CD EJECT button 4. Press VOLUME to extend the VOLUME outward. • When you press VOLUME, it extends outward so that it becomes easier to trun. To retract VOLUME, press it again. 5. Turn VOLUME to adjust the volume. 6. Press 5 or ∞ to select a folder. • You can not select a folder in which no MP3 file is recorded. 7. Press 2 or 3 to select a track. Pressing 3 skips to the start of the next track. Pressing 2 once skips to the start of the current track. Pressing again will skip to the previous track. • If you press and hold 2 or 3, you can per- form fast forward or reverse. 8. Press OPEN and then press CD EJECT to eject the CD-ROM. • Be sure to close the front panel after removing the CD-ROM. WARNING: • Do not use with the front panel left open. If the front panel is left open, it may result in injury in the event of an accident. Note: • You can select MP3 as the source by pressing SOURCE when a CD-ROM is loaded in this product. • When the front panel is open, multi-function but- tons are not available. • Do not insert anything other than a CD into the CD loading slot. • A CD left partially inserted after ejection may incur damage or fall out. • If a CD-ROM cannot be inserted fully or playback fails, make sure the recorded side is down. Press the CD EJECT and check the disc for damage before reinserting it. • If the built-in CD player cannot operate properly, an error message (such as "ERROR-12") appears on the display. Refer to "Understanding built-in CD player error messages" on page 74. 23