Pioneer PDP-425CMX User Manual - Page 34

Other Operations English Other Operations Setting the ORBITER This function gradually shifts the screen position at time intervals. ÷ This function is not supported when using the POINT ZOOM function. MENU 2/3 SET 5/∞ Remote control unit STANDBY/ON DISPLAY MENU / SET INPUT SCREEN SIZE - VOL + MENU SET 5/∞ 2/3 Main unit operating panel 1 Press the MENU button to display the menu screen. MENU PICTURE SCREEN CONTRAST BRIGHTNESS H.ENHANCE V. E N H A N C E SETUP : : : : INPUT1 OPTION 0 0 0 0 PICTURE RESET SET ENTER MENU EXIT 28 En 2 Use the 2/3 buttons to select [OPTION]. MENU PICTURE SCREEN LANGUAGE ENERGY SAVE TIMER SETTING S C R E E N M G T. AUTO SETUP MODE AUTO FUNCTION PIP DETECT SPLIT FREEZE SET ENTER INPUT1 SETUP OPTION :ENGLISH : S TA N D A R D :INACTIVE :OFF :ACTIVE :OFF MENU EXIT 3 Use the 5/∞ buttons to select [SCREEN MGT.], then press the SET button. MENU PICTURE SCREEN LANGUAGE ENERGY SAVE TIMER SETTING S C R E E N M G T. AUTO SETUP MODE AUTO FUNCTION PIP DETECT SPLIT FREEZE SET ENTER INPUT1 SETUP OPTION :ENGLISH : S TA N D A R D :INACTIVE :OFF :ACTIVE :OFF MENU EXIT 4 Use the 5/∞ buttons to select [ORBITER]. SCREEN MANAGEMENT ORBITER SOFT FOCUS :OFF :OFF SET CHANGE MENU EXIT 5 Press the SET button to activate the setting. The factory default setting is [OFF]. Each time the button is pressed, the setting alternates as follows: 3 OFF 3 MODE1 MODE3 2 MODE2 2 ÷ OFF The [ORBITER] is not being used. ÷ MODE1 ......... The image size is reduced, and the screen display position is changed. ÷ MODE2 ......... The image size is enhanced, and the screen display position is changed. ÷ MODE3 ......... Screen position is shifted in accordance with dot-by-dot orientation. 6 When finished with the setting, press the MENU button to return to the normal screen image. Note The [ORBITER] setting affects all input sources.