Pioneer VSX-35TX Owner's Manual - Page 21

PREPARATION Connecting Your Equipment Connecting Additional Amplifiers To hook up surround back speakers you need to use an additional amplifier. Other than for that purpose this receiver has more than sufficient power for any home use, but it is possible to add additional amplifiers to every channel of your system. Make the connections shown below to add amplifiers to power your speakers. Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall outlet. ANALOG INPUT L R ANALOG INPUT L R ANALOG INPUT ANALOG INPUT ANALOG INPUT L R Front channel amplifier Surround channel amplifier Center channel amplifier (mono) Powered sub woofer Surround back channel amplifier Plugging In memo You can use the additional amplifier on the surround back channels for a single speaker as well. In this case plug the amplifier into the L (SINGLE) terminal only. Up to two components can be powered from this receiver. Two of the outlets are switched, which means that power is switched on and off with the receiver. Before making or changing the connections, switch off the power and disconnect the power cord from the AC wall outlet. After connecting all your components, plug the receiver's power cord into a standard wall power outlet. Caution! Power consumption of any equipment connected to the switched power outlets should not exceed 100W (0.8 A). To avoid overheating, fire risk and possible malfunction, do not connect high-wattage appliances such as heaters, irons, monitors or TV sets to this units AC outlets. Disconnect the receiver from the power outlet when it's not in regular use, for example, when on vacation. Caution! Do not connect a monitor or TV to this unit's AC OUTLETS. 21