Pioneer VSX-35TX Owner's Manual - Page 83
Press the MULTI-ROOM & SOURCE
View all Pioneer VSX-35TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Using Other Functions Using the front panel with the MULTI-ROOM system 2,4,5 1 3,4,5 1 Press the MULTI-ROOM & SOURCE button. The display shown below will illuminate when the receiver is in STANDBY mode. 2 Press the CONTROL button. The light will start to blink. 3 Within ten seconds of step 2, select the FUNCTION with the INPUT SELECTOR. For this example we'll use the TUNER function. The display shown below will illuminate. OPERATION memo If you don't turn the multi room function off you won't be able to turn the entire main room system off. The INPUT SELECTOR steps through the functions in the following order: DVD/LD TV/SAT CD VCR 1 TUNER CD-R/TAPE 1 4 Press the CONTROL button again and use the INPUT SELECTOR to adjust the VOLUME. The volume can be adjusted in a range of -82dB to 0dB. If you slelcted FIXED in the SETUP MODE on the previous page you won't be able to adjust the volume. The display will appear as shown above. 5 When in TUNER function, press the CONTROL button and use the INPUT SELECTOR to tune in the station. The display will appear as shown below. « memo The A7 in this illustration/example Turn the input selector until you get: pertains to a station previously programmed into the receiver's memory. See p.56 for more details. 83