Pioneer VSX-35TX Owner's Manual - Page 79
Video Select, Changing the Display - reset
View all Pioneer VSX-35TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Using Other Functions Video Select This function allows you to listen to one sound source while you watch a different video source on your TV. The sound source is set in the normal fashion as is explained on p. 45. You then alter the video input with the VIDEO SELECT button. VIDEO SELECT Press the VIDEO SELECT button on the front panel to cycle through the different possible video inputs. The first press shows the video input you are currently using. After that pressing VIDEO SELECT cycles though the possibilities in the following order: DVD/LD ( OFF ) VCR1 TV/SAT VCR2 VIDEO The OFF setting means that no video signal is output. After choosing a video input the display on the receiver will show that input for about 5 seconds and then revert to showing the sound mode the receiver is in. The VIDEO SELECT remains set to the input you chose until you change the audio input. If you change audio functions the receiver will reset itself to make the video and audio inputs correspond. Also, if you switch the power of the receiver OFF when you turn it back on the video and audio inputs will reset so that they correspond. Changing the Display You can change the display on the front panel between the function and the sound mode by pressing the MULTI JOG dial (see #`15 on p. 23). MULTI JOG Press the MULTI JOG dial on the front panel to move between the function (DVD/LD, CD, etc.) display and the sound mode display. The display will remain on the setting you choose. If you turn the MULTI JOG dial to select a new function the functin is displayed. OPERATION 79