Pioneer VSX-35TX Owner's Manual - Page 53
DUAL MONO Setting
View all Pioneer VSX-35TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Basic Playback DUAL MONO Setting The dual mono setting can only be used when listening to Dolby Digital discs that have dual mono software encoded in them. Dual mono software usually is used to put two different soundtracks on one DVD. With this setting you can choose which channel in the dual mono setting you want to listen to. Thus, it is useful for soundtracks that have one language on one channel and a different language on the other. Remember this setting is only applicable if you are using Dolby Digital software with a dual mono soundtrack and want to isolate one of the channels therein. Otherwise, just ignore this function. . 1 2 1 Turn the receiver ON. 2 Hold down the RETURN button for 3 or 4 seconds. The receiver will cycle through the three different dual mono settings for as long as you hold the button down. Take your finger off the button when the mode that you want to use is displayed. DUAL ch1 setting The different settings are: DUAL ch1, where you only hear channel 1; DUAL ch2, where you only hear channel 2; and DUAL ch1/ch2, where you hear both channels, but independently from different speakers. The display will show dual mono for a while then revert to the sound mode you are in but you will still be listening to dual mono. DUAL ch2 setting DUAL ch1/ch2 setting When DUAL MONO is playing with ch 1 selected the L will blink. When playing with ch 2 selected the R will blink. When playing with ch 1/2 selected the L and R will blink. memo The default setting is DUAL ch1. OPERATION 53