Pioneer VSX-35TX Owner's Manual - Page 26

26

Display

All the display information is explained and/or referenced here.

5

DSP indicator (See p.42 – 44)

Light when a DSP or Advanced Theater mode

is selected.

6

STEREO indicator

Lights when a STEREO mode is selected.

7

Source indicators

3

indicator lights at the selecting source.

8

TAPE 2 indicator

Lights when the TAPE 2 monitor is on.

9

MASTER VOLUME indicator

Displays current volume level.

10

MULTI-ROOM indicator

Lights when the Multi-room system is on.

11

Sound control indicators

DNR –

Lights when the digital NR is on.

LOUDNESS –

Lights when the Loudness is on.

TONE –

Lights when the Tone control is on.

MIDNIGHT –

Lights when the Midnight mode

is on.

12

Tuner indicators

STEREO –

Lights when a FM stereo broadcast

is received in the auto stereo mode.

TUNED –

Lights when a broadcast is received.

MONO –

Lights when the tuner is set to

receive FM broadcasts with the mono mode

selected.

13

H.P. (headphones)

Lights when headphones are connected to the

PHONES jack (speakers systems A and B both

turn off automatically).

14

Character display

Shows current mode, status, etc.

15

Analog level indicators

OVER –

When the source signal is analog, this

lights if the signal is in danger of distorting.

Press INPUT ATT on the remote control to

lower the signal level.

ATT –

Lights when INPUT ATT is used to

reduce the level of the analog source signal.

1

Speaker indicators

Light to indicate the current speaker system, A

and/or B.

2

SIGNAL SELECT indicators

Light to indicate the input signal you selected.

ANALOG

–

Lights when analog signals are

assigned.

DIGITAL

–

Lights when digital audio signals are

selected.

AUTO

–

Lights when the receiver is set to

select the input signal automatically.

3

Program Format indicator

2

DIGITAL –

Lights when a source with

Dolby Digital signals is played.

DTS

–

Lights when a source with DTS audio

signals is played.

For Dolby Digital or DTS sources:

These

indicators change according to which channels

are active in the source. When all three LS (left

surround), S (surround) and RS (right surround)

light at the same time it means a SURROUND

EX source or a DTS ES source with surround

back channels is being used.

L –

Left front channel.

C –

Center channel.

R –

Right front channel.

LS –

Left surround channel.

S –

Surround channel (mono).

RS –

Right surround channel.

LFE –

Low Frequency Effects channel.

4

2

/dts mode indicators (See p.42 – 44)

2

DIGITAL –

Indicates multi channel playback

of a Dolby Digital source.

2

PRO LOGIC –

Lights when Dolby Pro Logic

decoding is switched on.

dts –

When the

2

/dts mode on the receiver is

on, this indicator lights to indicate playback of a

DTS signal.

THX –

Lights when the HOME THX CINEMA

mode is selected.

EX –

Lights when decoding a Surround EX

source.

Displays & Controls

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

Pioneer VSX-35TX Owner's Manual - Page 26

Display

Page 26 highlights