Pioneer VSX-35TX Owner's Manual - Page 91

Techno Tidbits & Problem-solving Symptom Cause Remedy You can't get DIGITAL to come up when using the SIGNAL SELECT button. When using THX AUTO mode the receiver is not playing in the EX mode. The Dolby Digital / DTS indicator doesn't light up even when playing a Dolby Digital / DTS source. • Either the digital connections or the DIGITAL IN SELECT choices are incorrect. • The TAPE2 MONITOR mode is ON. • Make sure the digital connections and the DIGITAL IN SELECT choices are done correctly. • Press the TAPE2 MONITOR button so it goes into the OFF setting. • You are not using a source with Surround EX flag. • There is no problem with your receiver but if you want to hear 7 channel sound switch to Surround EX mode. • The player is paused or stopped. • There is a mistake in the player settings for audio output. • Although it's a Dolby Digital / DTS source there is a possibility the present track is not Dolby Digital / DTS. • Play the source. • Fix the audio settings (check the manual that came with your DVD player. • There is no problem. The indicator won't light when the track is not a Dolby Digital / DTS track. If the unit does not operate normally due to external effects such as static electricity Disconnect the power plug from the outlet and insert again to return to normal operating conditions. STATION CALL button fill in sheet It's a good idea to make a note of your preset stations. Station No. *1 *2 *3 *4 *5 Station Name CLASS A Frequency Station No. *6 *7 *8 *9 *0 Station Name Frequency Station No. *1 *2 *3 *4 *5 Station Name Frequency CLASS B Station No. *6 *7 *8 *9 *0 Station Name Frequency Station No. *1 *2 *3 *4 *5 Station Name Frequency CLASS C Station No. *6 *7 *8 *9 *0 Station Name Frequency 91