Ricoh Epson Stylus Pro 7700 User Guide - Page 182
Auto Take-Up Reel Error Messages, Improving Print Quality
View all Ricoh Epson Stylus Pro 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
182 | Solving Problems Auto Take-Up Reel Error Messages If you have the optional Automatic Take-Up Reel System, check the following list for error messages that might appear: Message TAKE-UP DISCONNECTED SET AUTO TAKE-UP REEL SYSTEM IN PRINTER AND RESTART THE PRINTER TAKE-UP DISCONNECTED AUTO TAKE-UP REEL UNIT IS DISCONNECTED DO YOU CONTINUE? NO YES TAKE-UP ERROR CHECK THE STATUS OF AUTO TAKE-UP REEL UNIT AND RESTART THE PRINTER TAKE-UP ERROR IS ANYTHING OBSTRUCTING THE TAKE-UP REEL SENSOR SYSTEM? LOAD PAPER AGAIN Explanation The Auto Take-up Reel is not installed correctly. Response Turn the printer off, then install the Auto Take-up Reel correctly. See page 203. The Auto Take-up Reel is not installed correctly. Select YES to continue printing without using the Auto Take Up Reel. Or, select NO, turn the printer off, then connect the Auto Take-up Reel (see page 203) and restart the printer. Paper is not loaded on the reel Press the button and load the paper correctly. correctly; see page 204. The Auto Take-up Reel is not winding paper. Make sure nothing is obstructing the sensor. Press the button and load the paper correctly; see page 204. Improving Print Quality You can often improve print quality by doing the following: • Run a nozzle check and cleaning cycle. See page 152 for instructions. • Align the print head. See page 156 for instructions. • When you send a print job, make sure your print options are set correctly. For more information, see page 85 (Windows) or page 111 (Macintosh). 182