Ricoh Epson Stylus Pro 7700 User Guide - Page 96
Choosing Cut Sheet Paper Options, rotated 90 degrees and printed crosswise. Be sure to click
View all Ricoh Epson Stylus Pro 7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
96 | Printing With Epson Drivers for Windows Normal cut Double cut Single cut Note: These settings override settings made through the control panel. 8. Choose one of the following Auto Cut settings: • Normal Cut allows margin space at the top and bottom of each image. • Double Cut extends the space between images and trims each print individually. This provides the cleanest edge for borderless printing. • Single Cut allows images to be printed end-to-end and saves paper. With borderless printing, you may see a sliver of the previous or next image if you print multiple images in one print job. You will see a white margin between print jobs. • Off disables automatic cutting. Choose this setting if you want to operate the cutter manually, use the optional Auto Take-Up Reel, or print multiple print jobs without cutting. See page 69 for instructions on operating the cutter manually. 9. Select these additional roll paper options, if necessary: • Auto Rotate saves paper if your document length is shorter than the printable width of the roll. The document is automatically rotated 90 degrees and printed crosswise. Be sure to click Roll Width and select the width of your roll paper. • Print Page Line prints trim lines on the right and bottom edges of your pages. 10. When you're finished, click OK. Choosing Cut Sheet Paper Options Follow the steps in this section to print on cut sheet paper and select settings for borderless printing, if desired. (If you're printing on roll paper, see page 93.) 1. On the Properties or Preferences window, make sure the Main tab is selected. 96