Samsung NX58K9500WG/AA User Manual - Page 57
To delay starting the self-cleaning cycle, To cancel the self-cleaning cycle, After self-cleaning
View all Samsung NX58K9500WG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
07 MAINTENANCE CAUTION Do not use the surface burners while the gas oven is performing a self-cleaning cycle. To delay starting the self-cleaning cycle 3 4 2 1. Repeat steps 1 and 2 on the previous page. 2. Press the Delay Start button. The oven door locks. 3. Set the time you want the oven to start self-cleaning using the number pad. 4. Press the START/SET button. The oven will start self-cleaning at your specified time. To cancel the self-cleaning cycle You may find it necessary to stop or interrupt a self-cleaning cycle due to smoke in the oven. To turn off the self-cleaning cycle, press the OFF/CLEAR button. The cycle turns off, but the door remains locked and the Lock icon blinks until the oven temperature falls below 392 °F (200 °C). After self-cleaning • The door stays locked until the internal oven temperature falls below 392 °F. • When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash residue. • Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed using a vinegar-soaking cloth. • If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears on the display until the oven cools down. Wait until the message disappears, and start a new cycle. CAUTION Do not attempt to open the oven door immediately after the self-cleaning cycle is complete. The oven is still very hot when the door unlocks. Escaping hot air and/or steam could burn you. English - 57