Samsung NX58K9500WG/AA User Manual - Page 66

Warming drawer Problem Warming drawer will not work. Excessive condensation in the warming drawer. Warming drawer or storage drawer does not slide smoothly or drags. Possible cause Action The controls are not set properly. Reset the controls as described on page 50. The Self-Clean or Sabbath function is being used. The warming drawer will not operate when either of these functions is operating. Try again after these functions are completed or cancelled. The oven controls have been locked. Unlock the controls and try again. There is a blown fuse or tripped Replace blown fuse or reset circuit breaker. tripped circuit breaker. The temperature setting is too high. See page 50. The foods being warmed are not covered with a lid or aluminum foil. Cover foods with a lid or aluminum foil. You are trying to warm liquids. Liquid should not be warmed in the drawer. Remove liquids. The drawer is not properly aligned Remove and replace the drawer. with the full-extension roller (See page 60.) guide rails or nylon drawer guides. The contents in the drawer are too heavy. Reduce the weight and/or redistribute the contents in the drawer. Others Problem The product is not level. Possible cause The appliance has been installed improperly. The leveling leg(s) is (are) damaged or uneven. The kitchen cabinets are not properly aligned and make the range appear to be not level. Action Make sure the floor is level, strong, and stable. If the floor sags or slopes, contact a carpenter. Check and level the range. (See the Installation Instructions.) Ensure that cabinets are square and provide sufficient room for installation. English - 66