Sharp AR-M355U AR-M355 AR-M455 Operation Manual Suite - Page 251

GENERAL PROGRAMS Disabling switching of display order This program is used to disable the function that changes the display order of tabs when a selected tab is touched repeatedly in screens that have tabs such as the custom folder selection screen and folder selection screen of the document filing function and the address book screen of fax/image send mode. Disabling of clock adjustment This program is used to prohibit changes to the clock adjust setting. When the program is enabled, "Clock" in the custom settings cannot be used. To adjust the date and time, this program must first be disabled (remove the checkmark). Device control Use these programs when a peripheral device on the machine has failed or when you wish to temporarily disable a device. The programs can also be used to change the function setting of a device as required by your conditions of use. "Device control" consists of the following programs: G Original size detector setting G Disabling of document feeder G Disabling of duplex G Disabling of stapler G Disabling of punch G Disabling of optional paper drawer G Disabling of finisher G Disabling of mail-bin stacker G Disabling of covers/inserts mode G Saddle stitch position adjust G High speed stacking G Auto paper selection setting G Optimization of a hard disk Original size detector setting This program is used to select the standard original sizes that can be detected by the original size detection function. Select one of the four groups indicated below. The factory default setting is "INCH-1 (AB-1)". Original size detection by the document glass can also be disabled. Detectable original sizes Group Document feeder tray (for automatic document feeder) Document glass 11" x 17", 8-1/2" x 14", 1 INCH-1 8-1/2" x 11", 8-1/2" x 11"R, A3, A4 5-1/2" x 8-1/2" 11" x 17", 8-1/2" x 13", 2 INCH-2 8-1/2" x 11", 8-1/2" x 11"R, A3, A4 5-1/2" x 8-1/2" 3 AB-1 A3, A4, A4R, A5, B4, B5, B5R 11" x 17", 8-1/2" x 11", 216x330 4 AB-2 A3, A4, A4R, A5, B5, B5R, 216x330 11" x 17", 8-1/2" x 11", B4 If "CANCEL DETECTION AT DOCUMENT GLASS" is set, originals will be regarded as EXTRA for all copier functions and no original size will be displayed. Disabling of document feeder This program is used to prevent use of the reversing automatic document feeder when it malfunctions. In this case, scanning can still be performed using the document glass. Disabling of duplex This program is used to disable duplex printing when the duplex module malfunctions. If this program is set, only one-sided printing can be performed. Disabling of stapler This program is used to disable stapling when the stapler unit of the finisher or the saddle stitch finisher malfunctions. Disabling of punch Use this program when you wish to prohibit punching or when the punch unit of the finisher or saddle stitch finisher has failed. Disabling of optional paper drawer This program is used to disable use of the stand/3 x 500 sheet paper drawer or stand/MPD & 2000 sheet paper drawer when it malfunctions. Disabling of finisher Use this program when you wish to prohibit use of the finisher or saddle stitch finisher, or when either has failed. Disabling of mail-bin stacker This program is used to disable use of the mail-bin stacker when it malfunctions. Disabling of covers/inserts mode Use this program when you wish to prohibit use of the covers/inserts mode. 11