Sony DAV X10 Operating Instructions - Page 14
Connecting the Antenna (Aerial), Connect the cords to the AM terminals.
View all Sony DAV X10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Getting Started - BASIC - 3 Connecting the Antenna (Aerial) To connect the AM loop antenna (aerial) The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle or roll up the antenna (aerial). 1 Remove only the loop part from the plastic stand. 2 Set up the AM loop antenna (aerial). 3 Connect the cords to the AM terminals. Cord (A) or cord (B) can be connected to either terminal. Insert until this part. AM A B Insert the cords pushing down the terminal clamp. Note • Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result. Tip • Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound. 4 Make sure the AM loop antenna (aerial) is connected firmly by pulling softly. To connect the FM wire antenna (aerial) Connect the FM wire antenna (aerial) to the FM 75 Ω COAXIAL jack. FM wire antenna (aerial) (supplied) FM 75 Ω COAXIAL jack 14US