Sony DCR-DVD403 Operating Guide - Page 68
REMOTE CTRL Remote control, Except for DCR-DVD92/DVD602, REC LAMP Recording lamp, DISP OUTPUT
UPC - 027242670075
View all Sony DCR-DVD403 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
STANDARD SET (continued) DATE/TIME Date Time • appears for an image recorded using a flash. • The data code is displayed on the TV screen if you connect your camcorder to a TV. • The indicator toggles through the following sequences as you press DATA CODE on the remote commander: DATE/TIME CAMERA DATA OFF (no indication) (Except for DCR-DVD92/DVD602). • Depending on the disc condition, Bars [--:--:--] appear. • The setting returns to [OFF] when you have the power source disconnected from your camcorder for more than 5 minutes. DISC REMAIN AUTO Displays the remaining disc indicator for about 8 seconds in situations such as those described below. • When you check the disc remaining by sliding the POWER switch down to (Movie) or (Still). • When you set the POWER to (Movie) or (Still), then press the DISP/BATT INFO to switch the indicator off to on. • When the remaining capacity of the disc is less than 5 minutes for (Movie) or 30 images for (Still). • When you start recording from the line input. ON Always displays the remaining disc indicator. REMOTE CTRL (Remote control) (Except for DCR-DVD92/DVD602) The default setting is [ON] so that you can use the Remote Commander (p. 41). • Set to [OFF] to prevent your camcorder from responding to a command sent by other equipment' remote control. • The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes. REC LAMP (Recording lamp) The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].) BEEP ON A melody sounds when you start/stop recording, or operate the touch panel. OFF Cancels the melody. DISP OUTPUT LCD PANEL Shows displays such as the counter on the LCD screen and in the viewfinder. V-OUT/PANEL Shows the display also on the TV screen. SETUP ROTATE NORMAL Scrolls the setup items downwards by touching . OPPOSITE Scrolls the setup items upwards by touching . 68