Sony DCR-DVD403 Operating Guide - Page 97
Others, The disc title cannot be changed.
UPC - 027242670075
View all Sony DCR-DVD403 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
No sound is heard when playing back a disc. • The audio will not be output when you connect a device via the S video plug only. Connect the white and red plugs of the A/V connecting cable, too (p.78). You cannot dub correctly using the A/V connecting cable. • Set [DISP OUTPUT] to [LCD PANEL] (p.68). • The A/V connecting cable is not connected properly. Make sure that the A/V connecting cable is connected to the proper jack, i.e. to the output jack of a device you are dubbing a picture from, or to the input jack of another device for dubbing a picture from your camcorder (p.78). Others Unable to finalize. • Battery is running out during finalizing. Use an AC adaptor. • The disc has already been finalized. If you are using a DVD-RW (VIDEO mode)/DVD+RW, follow the required procedure to record additional material on the disc (p.50). You cannot edit or record additional material on a disc using other devices. • You may not be able to edit a disc recorded on your camcorder using other devices. The disc title cannot be changed. • You cannot record a disc title on a finalized DVD-R. • The disc has already been finalized. If you are using a DVD-RW (VIDEO mode)/DVD+RW, follow the required procedure to record additional material on the disc (p.50). • The disc title may not be changed on your camcorder if the disc title has been made by another device. A photomovie cannot be created. • There are no still images. • There may be a lot of still images on a disc and the remaining disc capacity is low. Delete unnecessary images from the disc (p.72). The melody or beep sounds for 5 seconds. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • Moisture condensation has occurred with the disc. Turn off your camcorder and leave it for about 1 hour (p.109). • Some problems have occurred in your camcorder. Remove the disc and insert it again, then operate your camcorder again. 97 Troubleshooting