Sony DCR-TRV25 Operating Instructions - Page 109

"Memory Stick" Operations Using a "Memory Stick" - Introduction Selecting the image size Still images: DCR-TRV25/TRV27: You can select either of two image sizes. 1152 × 864 or 640 × 480 (When the POWER switch is set to CAMERA or VCR, the image size is automatically set to 640 × 480.) The default setting is 1152 × 864. DCR-TRV18: 640 × 480 only Moving pictures: You can select either of two picture sizes. 320 × 240 or 160 × 112 The default setting is 320 × 240. (1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to the left (unlock) position. (2) Press MENU, then select STILL SET (still image) or MOVIE SET (moving picture) in with the SEL/PUSH EXEC dial (p. 179). (3) Turn the SEL/PUSH EXEC dial to select IMAGESIZE, then press the dial. (4) Turn the SEL/PUSH EXEC dial to select the desired image size, then press the dial. The indicator changes as follows: Still images*: 1152 640 Moving pictures: 320 160 1 POWER VCR OFF(CHG) CAMERA MEMORY LOCK 3 STILL SET* MEMORY SET STILL SET BURST QUALITY IMAGESIZE RETURN 1152 1152 × 864 640 × 480 REMAIN 17 [MENU] : END MOVIE SET MEMORY SET MOVIE SET IMAGESIZE REMAIN RETURN 320 320 × 240 160 × 112 REMAIN 40sec [MENU] : END 4 STILL SET* MEMORY SET STILL SET BURST QUALITY IMAGESIZE RETURN 640 × 480 REMAIN 56 [MENU] : END MOVIE SET MEMORY SET MOVIE SET IMAGESIZE REMAIN RETURN 160 × 112 REMAIN 2min [MENU] : END MENU * DCR-TRV25/TRV27 only 109