Sony DCR-TRV25 Operating Instructions - Page 176

Changing the menu settings To make the menu display disappear Press MENU. Menu items are displayed as the following icons: MANUAL SET CAMERA SET VCR SET LCD/VF SET MEMORY SET (except DCR-TRV16) PRINT SET (except DCR-TRV16) CM SET TAPE SET SETUP MENU OTHERS Selecting the mode setting of each item z is the default setting. Menu items differ depending on the position of the POWER switch. The screen shows only the items you can operate at the moment. POWER Icon/item Mode Meaning switch MANUAL SET PROGRAM AE - P EFFECT - D EFFECT - FLASH MODE z ON To suit your specific shooting requirement (p. 58) To add special effects like those in films or on the TV to images (p. 54, 65) To add special effects using the various digital functions (p. 55, 66) To fire the flash (optional) regardless of the brightness of the surrondings CAMERA MEMORY VCR CAMERA VCR CAMERA CAMERA MEMORY AUTO To fire the flash automatically AUTO FLASH LVL WHT BAL HIGH z NORMAL LOW - N.S.LIGHT AUTO SHTR z ON OFF z ON To fire the flash before recording to reduce the red-eye phenomenon To make the flash level higher than normal Normal setting To make the flash level lower than normal To adjust the white balance (p. 48) To use the NightShot Light function (p. 34) To cancel the NightShot Light function To automatically activate the electronic shutter when shooting in bright conditions CAMERA MEMORY CAMERA MEMORY CAMERA MEMORY CAMERA OFF To not automatically activate the electronic shutter even when shooting in bright conditions 176 Note on FLASH MODE and FLASH LVL You cannot adjust FLASH MODE and FLASH LVL if the external flash (optional) is not connected. Note on FLASH LVL You cannot adjust FLASH LVL if the external flash (optional) is not compatible with the flash level.