Sony DCR-TRV25 Operating Instructions - Page 38
Playing back a tape
View all Sony DCR-TRV25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
- Playback - Basics - Playing back a tape You can monitor the playback picture on the screen. If you close the LCD panel, you can monitor the playback picture in the viewfinder. You can control playback using the Remote Commander supplied with your camcorder. (1) Prepare the power supply and insert the recorded tape. (2) Set the POWER switch to VCR while pressing the small green button. (3) Open the LCD panel while pressing OPEN. (4) Press m to rewind the tape. (5) Press N to start playback. (6) To adjust the volume, press either of the two buttons on VOLUME. Sound is muted when the LCD panel is closed. - : To turn the volume down + : To turn the volume up 3 2 POWER VCR OFF(CHG) CAMERA MEMORY 1 4 REW 5 PLAY 6 VOLUME To stop playback Press x. When monitoring on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out. If you leave the power on for a long time Your camcorder gets warm. This is not a malfunction. When you open or close the LCD panel 38 Make sure that the LCD panel is set vertically.