Sony DCR-TRV25 Operating Instructions - Page 39

Playing back a tape To display the screen indicators - Display function Press DISPLAY on your camcorder or the Remote Commander. The indicators appear on the screen. To make the indicators disappear, press DISPLAY again. DATA CODE DISPLAY Playback - Basics DISPLAY About date/time and various settings Use the Remote Commander for this operation. In addition to images, your camcorder automatically records the recording data, including date/time and various settings on the tape (data code). 1 Set the POWER switch to VCR, then play back a tape. 2 Press DATA CODE on the Remote Commander. The display changes as follows: date/time t various settings (SteadyShot, white balance, gain, shutter speed, aperture value, exposure mode) t no indicator Date/time 50min 0:00:23:01 JUL 4 2002 12:05:56 PM [a] Tape counter [b] SteadyShot OFF [c] Exposure mode [d] White balance [e] Gain [f] Shutter speed [g] Aperture value Various settings 50min 0:00:23:01 [a] [b] [c] [d] AUTO 60 AWB F2.0 9dB [e] [f] [g] To not display various settings Set DATA CODE to DATE in the menu settings (p. 184). The display changes as follows when you press DATA CODE on the Remote Commander: date/time y no indicator 39