Sony DCR-TRV25 Operating Instructions - Page 117

Recording an image from a tape as a still image - Except DCR-TRV16 Your camcorder can read moving picture data recorded on a tape and record it as a still image on a "Memory Stick". Your camcorder can also capture moving picture data through the input connector and record it as a still image on a "Memory Stick". Before operation •Insert a recorded tape into your camcorder. •Insert a "Memory Stick" into your camcorder. (1) Set the POWER switch to VCR. (2) Press N. Moving picture recorded on the tape is played back. (3) Keep pressing PHOTO lightly until the picture from the tape freezes. CAPTURE appears on the screen. Recording does not start yet. To change from the image selected to another image, release PHOTO once and press it lightly again. (4) Press PHOTO deeper. The image displayed on the screen will be recorded on the "Memory Stick." Recording is complete when the bar scroll indicator disappears. 2 REW PLAY FF 1 POWER VCR OFF(CHG) CAMERA MEMORY "Memory Stick" Operations 3 PHOTO 4 CAPTURE PHOTO Image size of still images Image size is automatically set to 640 × 480. When the access lamp is lit or flashing Do not shake or strike the unit. Also, do not turn the power off, eject a "Memory Stick". Otherwise, image data may become damaged. If " " appears on the screen The inserted "Memory Stick" is incompatible with your camcorder because its format does not conform with your camcorder. Check the format of the "Memory Stick." 117