Sony DCR-TRV25 Operating Instructions - Page 64
Frame by frame recording, Frame recording
View all Sony DCR-TRV25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Frame by frame recording - Frame recording You can make a recording with a stop-motion animated effect using frame recording. To create this effect, alternately move the subject a little and make a frame recording. We recommend that you use a tripod, and operate your camcorder using the Remote Commander after step 4. (1) In the standby mode, press MENU. Select FRAME REC in with the SEL/ PUSH EXEC dial (p. 177). (2) Select ON with the SEL/PUSH EXEC dial. (3) Press MENU to erase the menu display. The FRAME REC indicator lights up. (4) Press START/STOP to start frame recording. Your camcorder makes a recording for about six frames, and returns to recording standby. (5) Move the subject, and repeat step 4. 4 MENU 2 CAMERA SET SELFTIMER D ZOOM PHOTO REC 16:9WIDE STEADYSHOT FRAME REC OFF INT. REC ON RETURN [MENU] : END CAMERA SET SELFTIMER D ZOOM PHOTO REC 16:9WIDE STEADYSHOT FRAME REC ON INT. REC RETURN [MENU] : END To cancel the frame recording Perform either of the following: - Set FRAME REC to OFF in the menu settings. - Set the POWER switch to other than CAMERA. Note The proper remaining tape is not indicated if you use the frame recording function continuously. When the POWER switch is set to MEMORY (except DCR-TRV16) You cannot use the frame recording. When using the frame recording function The last recorded frame is longer than other frame. 64