Sony FWDS42H1 Operating Instructions - Page 68
Picture/Sound Settings, Picture Mode, Picture Mode Adjust.
UPC - 027242754423
View all Sony FWDS42H1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Picture/Sound Settings For Video Input VIDEO To highlight an option and to change settings, press F/f/G/g. Press to confirm the selection. The "Picture/Sound" settings include the following options: Picture Mode "Vivid": Select for enhanced picture contrast and sharpness. "Standard": Select for standard picture settings. "Custom": Allows you to store preferred settings. "Conference": Adjusts the picture quality for video conferencing under fluorescent lights. "TC Control": The setting is common with "Vivid". In addition, you can use the "True Color Control" function (after-mentioned). Tip To change from one "Picture Mode" option to another, you can also use PICTURE on the remote control instead. Notes • "Conference" may not be effective depending on the environment or the video conference system under use. In this case, adjust the picture quality, switch to other settings of "Picture Mode", etc. • In "TC Control", "Brightness Boost" is fixed to Off. Picture Mode Adjust. "Backlight": Adjusts to brighten or darken the screen. "Contrast": Adjusts picture contrast. "Brightness": Adjusts to brighten or darken the picture. "Chroma": Adjusts to increase or decrease color intensity. "Phase": Adjusts the color tones of the picture. "Sharpness": Adjusts to sharpen or soften the picture. "Noise Reduction": Select to reduce the noise level of connected equipment. Select from "Off", "Low", "Mid", "High" to set the noise level. "CineMotion": Select "Auto" to optimize the screen display automatically detecting film content and applying a reverse 3-2 pull down or 2-2 pull down process. Moving picture will appear clearer and more natural looking. Select "Off" to disable the detection. "Dynamic Picture": Select "On" to enhance contrast by making white brighter and black darker. "Gamma Correct.": Balances the light and dark portions of pictures. Select from "High", "Mid", "Low" to make settings. Notes • "Option" can only be set when there is a DVI input. • Gamma setting is in accordance with the Grayscale Standard Display Function (GSDF) of the Digital Imaging and Communications in Medicine (DICOM) standards. However, this setting is for reference only and cannot be used for medical diagnosis. "Color Temp.":White tone can be adjusted to suit your preference. The factory default settings are adjusted to color temperature. "Cool": Select to give the white colors a blue tint. "Neutral": Select to give the white colors a neutral tint. "Warm": Select to give the white colors a red tint. "Custom": Enables a broader range of white tone to be set than above. 22 GB