Home » Sony Manuals » Flat Panel Televisions » Sony FWDS42H1 » Manual Viewer

Sony FWDS42H1 Operating Instructions - Page 69

Sound Mode, Sound Mode Adjust., Brightness Boost, True Color Control, Reset, Dynamic, Standard, Custom

UPC - 027242754423

Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Tip Restores the default settings by selecting "Reset" on the tone adjusting screen. "Brightness Boost": Emphasizes the brightness of the image. Notes • When "Brightness Boost" is set to "On", you cannot adjust the "Backlight", "Contrast", "Brightness" or "Color Temp." settings. • When "Brightness Boost" is set to "On" and "ECO Mode" is switched "Off", the brightness is at its maximum. "True Color Control": You can adjust the details of hue and saturation for each of 4 colors : red, green, yellow, blue, and you can highlight specific colors in the image. Select the color which you want to adjust, and you can check and see which part of current image will be adjusted. Then you can adjust it using the matrix dialog. Notes • This option can be adjusted when "Picture Mode" is set to "TC Control". • In "PAP" mode, you cannot select this option. Even if you select this option in the single- picture screen, the setting of this option may not be applied in the "PAP" mode "Reset": Resets all settings of "Picture Mode Adjust." to default settings. Notes • "Phase" is not available when the input is Video or S Video and the color system of video signal is not NTSC. • "Dynamic Picture" is not available when "Picture Mode" is set to "Conference" or "TC Control." • You can make settings and adjustments for each "Picture Mode" but "Backlight," "Noise Reduction" and "CineMotion" settings are common for all "Picture Mode." • "Dynamic Picture" and "CineMotion" do not function in PAP mode. Sound Mode You can adjust the sound output from the speakers SS-SPG01 (not supplied) with various "Sound Mode" settings. "Dynamic": Select to enhance treble and bass. "Standard": Flat setting. "Custom": Allows you to store preferred settings. Sound Mode Adjust. "Treble": Adjusts to increase or decrease higher-pitched sounds. "Bass": Adjusts to increase or decrease lower-pitched sounds. "Balance": Adjusts to emphasize left or right speaker balance. "Surround": Select the surround mode according to the type of picture. "Off": No surround output. "Hall": When desiring to give the stereo sound of movies or music programs a greater sense of presence. "Simul.": When desiring to give ordinary monaural programs or news telecasts an enhanced sense of presence using simulated stereo sound. "Reset": Resets all settings of "Sound Mode Adjust." to default settings. Tips • You can alter the "Picture Mode Adjust." settings ("Contrast", "Brightness", "Chroma ", etc.) for each "Picture Mode". • You can adjust the "Sound Mode Adjust." settings ("Treble" and "Bass") when the "Sound Mode" is set to "Custom". GB Note In the "PAP" mode, only "Picture/Sound" settings for the active picture can be adjusted. 23 GB

Section	Page
JP	2
目次	3
警告	4
注意	5
電池についての安全上のご注意	7
その他の安全上のご注意	8
使用上のご注意（性能を保持するために	9
設置するときのご注意	10
各部の名称と働き	11
前面	11
後面	12
リモコン	15
ボタンの機能	15
リモコンの特別ボタン	17
ワイド切換を使う	17
2画面設定を使う	18
ID MODEボタンを使う	19
オプションアダプター	20
接続	21
スピーカーの接続	21
電源コードの接続	21
ケーブルを処理する	22
メニューの設定	23
メニュー一覧	23
画質/音質メニュー	24
画面メニュー	28
設定メニュー	32
ネットワーク機能	35
ネットワーク機能を使う準備をする	35
PCで操作する	37
その他の情報	40
故障かな？と思ったら	40
入力信号一覧表	42
仕様	44
索引	46
GB	48
Table of Contents	51
Introduction	52
Precautions	52
Recommendations on Installation	54
Location and Function of Parts and Controls	55
Front	55
Rear	56
Remote Control	59
Button Description	59
Special Buttons on the Remote Control	61
Using the Wide Mode	61
Using the PAP Setting	62
Using the ID MODE button	63
Optional Adaptors	64
Connections	65
Connecting the Speakers	65
Connecting the AC Power Cord	65
Cable Management	66
Using the Settings	67
Overview of the Menus	67
Picture/Sound Settings	68
Screen Settings	72
Setup Settings	76
Network Functions	80
Preparations for Using the Network Functions	80
PC Operation	82
Other Information	85
Troubleshooting	85
Input Signal Reference Chart	87
Specifications	89
Index	91
FR	92
Table des matières	93
Introduction	94
Précautions	94
Recommandations pour l’installation	96
Emplacement et fonction des pièces et commandes	97
Avant	97
Arrière	98
Télécommande	101
Description des touches	101
Touches spéciales de la télécommande	103
Utilisation du Mode cinéma	103
Utilisation du réglage PAP	104
Utilisation de la touche ID MODE	105
Adaptateurs en option	106
Raccordements	107
Raccordement des enceintes	107
Raccordement du cordon d’alimentation secteur	107
Gestion des câbles	108
Utilisation des réglages	109
Description générale des menus	109
Réglages Image/Son	110
Réglages Écran	114
Réglages Réglage	118
Fonctions réseau	122
Préparation à l’utilisation des fonctions réseau	122
Utilisation d’un ordinateur	124
Informations supplémentaires	127
Dépannage	127
Tableau de référence des signaux d’entrée	129
Spécifications	131
Index	133
DE	134
Inhalt	135
Einführung	136
Sicherheitsmaßnahmen	136
Empfehlungen zur Installation	138
Lage und Funktion der Teile und Bedienelemente	139
Vorderseite	139
Rückseite	140
Fernbedienung	143
Beschreibung der Tasten	143
Sondertasten auf der Fernbedienung	145
Der Breitbildmodus	145
Einstellen von PAP	146
Die Taste ID MODE	147
Zusatzadapter	148
Anschlüsse	149
Anschließen der Lautsprecher	149
Anschließen des Netzkabels	149
Umgang mit den Kabeln	150
Arbeiten mit den Menüeinstellungen	151
Übersicht über die Menüs	151
Bild/Ton-Einstellungen	152
Bildschirm-Einstellungen	156
Grundeinstellungen-Einstellungen	160
Netzwerkfunktionen	164
Vorbereitungen zum Arbeiten mit den Netzwerkfunktionen	164
PC-Betrieb	166
Weitere Informationen	169
Störungsbehebung	169
Diagramm der Eingangssignale	171
Technische Daten	173
Index	175
ES	178
Índice	179
Introducción	180
Precauciones	180
Recomendaciones para la instalación	182
Ubicación y función de componentes y controles	183
Parte frontal	183
Parte posterior	184
Mando a distancia	187
Descripción de los botones	187
Botones especiales del mando a distancia	189
Utilización del modo ancho	189
Utilización del ajuste PAP	190
Utilización del botón ID MODE	191
Adaptadores opcionales	192
Conexiones	193
Conexión de los altavoces	193
Conexión del cable de alimentación de ca	193
Organización de los cables	194
Uso de los ajustes	195
Descripción general de los menús	195
Ajustes de Imagen/Sonido	196
Pantalla Ajuste	200
Ajustes Ajuste	204
Funciones de red	208
Preparativos para la utilización de las funciones de red	208
Uso con un ordenador	210
Otra información	213
Solución de problemas	213
Tabla de referencia de señal de entrada	215
Especificaciones	217
Índice alfabético	219
IT	220
Indice	221
Introduzione	222
Precauzioni	222
Consigli relativi all’installazione	224
Posizione e funzione delle parti e dei comandi	225
Parte anteriore	225
Parte posteriore	226
Telecomando	229
Descrizione dei tasti	229
Tasti speciali del telecomando	231
Uso del modo ampio	231
Uso dell’impostazione PAP	232
Uso del tasto ID MODE	233
Adattatori opzionali	234
Collegamenti	235
Collegamento dei diffusori	235
Collegamento del cavo di alimentazione CA	235
Sistemazione dei cavi	236
Uso delle impostazioni	237
Panoramica dei menu	237
Impostazioni Immagine/Audio	238
Impostazioni Schermo	242
Impostazioni della schermata Impostazione	246
Funzioni di rete	250
Operazioni preliminari per l’uso delle Funzioni di rete	250
Funzionamento del PC	252
Altre informazioni	255
Guida alla soluzione dei problemi	255
Tabella di riferimento dei segnali di ingresso	257
Caratteristiche tecniche	259
Indice dei sottomenu	261
CS	262
目录	263
介绍	264
使用前须知	264
关于安装的建议	265
部件和控制器的位置和功能	266
前视图	266
后视图	267
遥控器	270
按钮说明	270
遥控器上的特殊按钮	272
使用宽模	272
使用PAP设	273
使用ID MODE按	274
可选购的适配器	275
连接	276
连接扬声器	276
连接交流电源线	276
电缆布置	277
使用设	278
菜单综述	278
Picture/Sound设定	279
Screen设定	283
Setup设定	287
网络功能	290
使用网络功能的准备工	290
个人电脑操	292
其它信息	295
故障排除	295
输入信号参照表	297
规格	299

Match case Limit results 1 per page

Tips

•

You can alter the “Picture Mode Adjust.” settings (“Contrast”, “Brightness”, “Chroma ”, etc.) for each “Picture Mode”.

•

You can adjust the “Sound Mode Adjust.” settings (“Treble” and “Bass”) when the “Sound Mode” is set to “Custom”.

In the “PAP” mode, only “Picture/Sound” settings for the active picture can be adjusted.

Tip

Restores the default settings by selecting “Reset” on the tone adjusting screen.

“Brightness Boost”:

Emphasizes the brightness of the image.

•

When “Brightness Boost” is set to “On”, you cannot adjust the “Backlight”, “Contrast”,

“Brightness” or “Color Temp.” settings.

•

When “Brightness Boost” is set to “On” and “ECO Mode” is switched “Off”, the brightness

is at its maximum.

“True Color Control”:

You can adjust the details of hue and saturation for each of

4 colors : red, green, yellow, blue, and you can highlight specific colors in the image.

Select the color which you want to adjust, and you can check and see which part of

current image will be adjusted. Then you can adjust it using the matrix dialog.

•

This option can be adjusted when “Picture Mode” is set to “TC Control”.

•

In “PAP” mode, you cannot select this option. Even if you select this option in the single-

picture screen, the setting of this option may not be applied in the “PAP” mode

“Reset”:

Resets all settings of “Picture Mode Adjust.” to default settings.

•

“Phase” is not available when the input is Video or S Video and the color system of video

signal is not NTSC.

•

“Dynamic Picture” is not available when “Picture Mode” is set to “Conference” or “TC

Control.”

•

You can make settings and adjustments for each “Picture Mode” but “Backlight,” “Noise

Reduction” and “CineMotion” settings are common for all “Picture Mode.”

•

“Dynamic Picture” and “CineMotion” do not function in PAP mode.

Sound Mode

You can adjust the sound output from the speakers SS-SPG01 (not supplied) with

various “Sound Mode” settings.

“Dynamic”:

Select to enhance treble and bass.

“Standard”:

Flat setting.

“Custom”:

Allows you to store preferred settings.

Sound Mode Adjust.

“Treble”:

Adjusts to increase or decrease higher-pitched sounds.

“Bass”:

Adjusts to increase or decrease lower-pitched sounds.

“Balance”:

Adjusts to emphasize left or right speaker balance.

“Surround”:

Select the surround mode according to the type of picture.

“Off”:

No surround output.

“Hall”:

When desiring to give the stereo sound of movies or music programs a

greater sense of presence.

“Simul.”:

When desiring to give ordinary monaural programs or news telecasts

an enhanced sense of presence using simulated stereo sound.

“Reset”:

Resets all settings of “Sound Mode Adjust.” to default settings.

Note

Notes