Sony HDWM2000/20 Operation Manual - Page 101
Setting, LOCAL, REMOTE, PRESET, Manual setting, mode/C PHAS
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Page 2 Item F1 (V.PROC) Setting Selects the control method for the internal digital video processor. LOCAL: Change the settings of the internal digital video processor by using this function menu. REMOTE: Use the optional BVR-50/50P Remote Control Unit to control the internal digital video processor. MENU: Change the settings of the internal digital video processor by using F5 (MENU) of the HOME page. Note When controlling the unit from the HKDV-503/900, set this item to MENU. F2 (VIDEO) Sets the HD/SD video signal output level (-∞ to +3 dB). PRESET: Regardless of manually set values, the video signal is set to the standard level. Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the value for the video signal output level. F3 (CHROMA) Sets the HD/SD chroma signal output level (-∞ to +3 dB). PRESET: Regardless of manually set values, the chroma signal is set to the standard level. Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the value for the chroma signal output level. F4 (HUE) Sets the color phase (phase relative to burst) (59.94i, 29.97PsF PRESET: Regardless of manually set values, sets the color phase to the standard value. mode)/(C PHAS) (50i, 25PsF, Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust 23.98PsF, 24PsF the value across the range ±30°. mode) F5 (SETUP) Sets the setup level (59.94i, 29.97PsF mode) or black level (50i, 25PsF, 23.98PsF, 24PsF mode) (59.94i, 29.97PsF mode)/(BLACK) PRESET: Regardless of manually set values, the level is set to the standard value. (50i, 25PsF, Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust 23.98PsF, 24PsF the setup level across the range ±30 IRE (59.94i, 29.97PsF mode) or to adjust the black level across mode) the range ±210 mV (50i, 25PsF, 23.98PsF, 24PsF mode). F6 (YC DLY) Sets amount of Y/C delay for playback of analog Betacam tapes. PRESET : Regardless of manually set values, the Y/C delay is set to the standard value. Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust the Y/C delay across the range ±100 ns. Chapter 9 Function Menu 9-5 Chapter 9 Function Menu