Sony HDWM2000/20 Operation Manual - Page 49
Playback in jog mode, To return to normal-speed playback
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Playback in jog mode In jog mode, you can control the speed of playback by the speed of turning the search dial. The playback speed range is ±1 times normal speed. The playback speed range can be ±3 times normal speed by changing the setting of setup menu item 116. To carry out playback in jog mode, use the following procedure. Z Playback in shuttle mode In shuttle mode, you can control the speed of playback by the angular position of the search dial. The range of playback speed is as follows. • HDCAM tape: ±50 times normal speed (59.94i, 29.97PsF mode), ±58 times normal speed (50i, 25PsF mode), ±60 times normal speed (24PsF, 23.98PsF mode) • Digital Betacam tape: ±50 times normal speed • MPEG IMX tape: ±78 times normal speed • Betacam SX tape: ±78 times normal speed • Analog Betacam tape: ±35 times normal speed (525/ 59.94 mode), ±42 times normal speed (625/50 mode) There are detents on the search dial at the still position and at ±5 times normal speed. To carry out playback in shuttle mode, use the following procedure. Chapter 4 Recording and Playback Z 1 1,2,3 1 Press the JOG button or search dial so that the JOG button is lit. Pressing the search dial toggles between jog mode and shuttle mode. 2 Turn the search dial in the desired direction, at the speed corresponding to the desired playback speed. Playback in jog mode starts. 3 To stop playback in jog mode, stop turning the search dial. The function to toggle between jog mode and shuttle mode each time the search dial is pressed can be disabled by changing the setting of setup menu item 101. 1 3 1,2,3 1 Press the SHUTTLE button or search dial so that the SHUTTLE button is lit. Pressing the search dial toggles between jog mode and shuttle mode. 2 Turn the search dial to the desired angle corresponding to the desired playback speed. Playback in shuttle mode starts. 3 To stop playback in shuttle mode, return the search dial to the center position, or press the STOP button. The function to toggle between jog mode and shuttle mode each time the search dial is pressed can be disabled by changing the setting of setup menu item 101. To return to normal-speed playback Press the PLAY button. 4-7 Chapter 4 Recording and Playback