Sony HDWM2000/20 Operation Manual - Page 116
Audio, F-key, In/mx, Item Number, Settings, Field, Frame, Control Panel, Remote, Ctl Lock In Var/shtl
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
10-4 Items in the Extended Setup Menu Menu items in the range 100 to 199, relating to the control panels (Continued) Item number Item name Settings 118 KEY INHIBIT SWITCH Select which switches and buttons can be operated when the KEY INHIBIT EFFECTIVE AREA switch on the switch panel is set to ON. The following sub-items control different Sub-item sets of switches and buttons independently. 1 REMOTE SELECT Select whether the REMOTE 1(9P) and 2(50P) buttons in the upper control panel are enabled. DIS : Disabled ENA: Enabled 2 AUDIO/F-KEY Select whether the audio monitor signal selection buttons and F1 to F6 buttons in the lower control panel are enabled. DIS : Disabled ENA: Enabled AUDIO: Audio signal selection, audio mixing setting, and monitor signal selection are disabled. F-KEY: The function keys (including HOME) are disabled. IN/MX: Audio signal selection and audio mixing setting are disabled. 3 MODE CONTROL Select which switch and button operations can be carried out from the lower control panel of this unit or an external control panel connected to this unit. DIS : All switches and buttons are disabled. EDIT: All switches and buttons for editing operations other than the audio monitor signal selection buttons and F1 to F6 buttons are disabled. ENA: All switches and buttons other than the audio monitor signal selection buttons and F1 to F6 buttons are enabled. 119 VARIABLE SPEED LIMIT Select the playback speed range when carrying out playback in variable speed IN KEY PANEL CONTROL mode from the control panel of this unit. OFF : -1 to +2 times normal speed ON: 0 to 1 times normal speed 120 CTL LOCK IN VAR/SHTL Select whether the tape transport should be phase-locked to the CTL signal during playback in variable speed or shuttle mode. OFF : Not phase-locked. ON: Phase-locked at the following speeds: -1, -0.5, 0.5, 1.0 and 2.0 times normal. 121 DT MODE Select field or frame mode for variable speed playback. FIELD : Always field playback FRAME: Frame playback in the noiseless playback speed range; otherwise field playback. Frame playback provides higher-density still pictures than field playback. 125 130 133 134 10-12 AUTO REWIND TIMER DISPLAY DIMMER CONTROL TELE-FILE CONTROL MODE TELE-FILE MENU AUTO POPUP Chapter 10 Setup Menus Notes • For analog Betacam playback, field playback is always used. For Digital Betacam playback, the frame playback is valid only in the forward direction. • In the case of HDCAM tapes recorded in PsF mode, playback is automatically performed in frame mode. Select whether to rewind the tape automatically when recording or playback reaches the end of a tape. DIS: Do not rewind the tape automatically. ENA : Rewind the tape automatically. Set the brightness of the time data/menu display panel. 0 to 7 : Set in this range. 0 is the brightest, and 7 the dimmest. Select the device used for data modification operations in the Tele-File menu. CONTROL PANEL : Operate with the control panel of this unit. REMOTE: Operate with remote devices connected to connectors such as REMOTE1, REMOTE2, and RS-232C. Select whether to open the Tele-File menu automatically when a cassette with a Tele-File label is loaded. However, this is valid only when the function menu is HOME, HOME2, or page 1 to 6. OFF : Do not open the Tele-File menu automatically. ON: Open the Tele-File menu automatically. (Continued) Chapter 10 Setup Menus