Sony HDWM2000/20 Operation Manual - Page 94
UMID Output and Display, 8-3-1 UMID Output Settings, 8-3-2 UMID Display, UMID Display
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
8-3 UMID Output and Display This section explains how to output and display UMIDs. Note When the number of active scan lines for HD SDI output is set to 720P, output and displaying of UMID are not carried out. 8-3-1 UMID Output Settings You can choose to output UMIDs or not, and select either Basic UMID or Extended UMID when you choose to output UMIDs. Make these settings using setup menu item 651 UMID OUTPUT. (UMID information is added to HD SDI output.) See page 10-22 for more information about setup menu item 651. 8-3-2 UMID Display During recording and playback, UMID data appears in the menu display section of the control panel and on the video monitor. To display the UMID In function menu page 5, press the F2 (UMID) button. See Section 9-1-2 "Using the Function Menu" (page 9-2) for more information about function menu operations. The UMID appears in the menu display section of the control panel and on the video monitor. First item in UMID displayed in menu display section UMI INSTANCE 24PRS XX-XX-XX D HOME F1 F2 F3 F4 EXIT F5 F6 See the next section "UMID display on the video monitor" for examples of the UMID displayed on the video monitor. To switch the displayed UMID item in the menu display section Rotate the MULTI CONTROL knob. 8-4 Chapter 8 UMID Functions To exit from UMID display Press the F6 (EXIT) button. UMID display on the video monitor The video monitor connected to the COMPOSITE VIDEO OUTPUT 3 (SUPER) connector or the SDI OUTPUT 3 (SUPER) connector on the connector panel displays all UMID items at once. The display of each line is explained below. UMID INFORMATION INSTANCE 24PRS XX-XX-XX 1 MATERIAL SMPTE 2 XX-XX-XX-XX-XX-XX-XX-XX XX-XX-XX-XX-XX-XX-XX-XX 3 DATE/TIME 20XX/XX/XX XX:XX:XX:XX +XX:XX 4 ALTITUDE XXXXXXXXm 5 LONGITUDE EXXX XX'XX.XX 6 LATITUDE SXXX XX'XX.XX 7 ORGANIZATION XXXX 8 USER XXXX COUNTRY XXXX 9 1 Instance Number generation method and Instance Number The generation method is displayed as follows. CP+16: "16-bit PRS (pseudo-random sequence) +Copy No." method 24PRS: 24-bit PRS method others: Other than the above 2 Material Number generation method SMPTE: SMPTE method IEEE 1394 ZONE: IEEE 1394 ZONE method IEEE 1394 RND: IEEE 1394 RND method others: Other than the above When menu item 656 MATERIAL NO. is set to NEW, the SMPTE method is used. 3 Material Number The material number is displayed in hexadecimal across two lines. The following items, 4 through 9, are contained in the Source Pack. 4 Date/Time Date/Time data is displayed across two lines. The upper line shows the MJD (Modified Julian Date) contained in the Source Pack, converted to UTC. The lower line shows the data in unit count format (hours : minutes : seconds : frame) converted to UTC. Chapter 8 UMID Functions