Sony HDWM2000/20 Operation Manual - Page 82
Setting display area, Menu items functions, Item name, Setting
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
7-3 Tele-File Menu Setting display area Displays the setting of the currently selected data type, and a cursor ("*" or ">"). The meaning of the cursor symbols is as follows: *: Indicates that the mode is clip data display mode or attribute data display/modify mode, and that data is selected. >: Indicates that the mode is clip data modify mode or attribute data display/modify mode, and prompts for data entry or modification. Menu items (functions) Display menu items (functions). These are common for all of the data items in clip data display mode. The function assignments for each item are as follows. Item name F1 (ATTRIB) F2 (SELECT) F3 (T) F4 (t) F5 (UNDO) F6 (WR/EXT) Setting Clip data display mode menu items Selects attribute data display/modify mode. For details about attribute data display/modify mode, see Section 7-3-5 "Displaying and Modifying Attribute Data" (page 7-11). Selects a data modification mode for the data selected in the clip. The cursor changes from "*" to ">". Note In the following cases, the SELECT item does not appear, and it is not possible to select a data modification mode. • When setup menu item 133 is set to REMOTE • When the memory label itself is write protected For more information about clip data modifications, see Section 7-3-3 "Modifying Clip Data" (page 7-7). Selects data in a clip. With each press, the "*" cursor moves to select the previous data item. The display scrolls to the left when the cursor moves to data that is not currently displayed. Selects data in a clip. With each press, the "*" cursor moves to select the next data item. The display scrolls to the right when the cursor moves to data that is not currently displayed. Selects undo check mode. This button appears and is enabled when data has been modified after being read from the Tele-File label. For more information about undo check mode, see Section 7-3-4 "Undo/Resume Functions" (page 7-10). Writes data and exits from the Tele-File menu (return to function menu page 5). Note If you attempt to change clip data that is writeprotected, the message "PROTECTED CLIP!" appears, and it is not possible to change the data. Refer to "To make write protect, mark, and recording start point settings" (page 7-9), and remove the writeprotect setting. Chapter 7 Tele-File 7-4 Chapter 7 Tele-File