Sony HDWM2000/20 Operation Manual - Page 69
Set the PREREAD to OFF., Set the F6 PREREAD
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 5 Editing Notes • In preread editing, if an input video signal is used as the reference signal for the output video signal, this forms a feedback loop. To prevent the occurrence of feedback, set the F2 (OUTREF)(see page 9-7) in function menu page 4 to REF, and set item 309 in the extended setup menu to AUTO1 (see page 10-15) so as to use an external reference signal. • When the preread mode is selected, to prevent feedback due to the loop connection, whatever the editing mode of this unit, no E-E video output is available. When the PREREAD is set to OFF after preread editing, however, if the loop connection remains and an E-E signal is output, feedback will occur. To prevent this, select PB mode for the video and digital audio channels in all the modes before the preread editing, as follows. 1 Set F2 (PB/EE) in function menu HOME page to PB. 2 Set the F6 (PREREAD)(see page 9-7) in function menu page 4 to ON. 3 Make the necessary connections for the preread editing. 4 After selecting the desired insert editing mode, carry out the preread editing. 5 When the preread editing is completed, remove the connections. 6 Set the PREREAD to OFF. 7 Check that no loop connection remains. 5-15 Chapter 5 Editing