Sony HDWM2000/20 Operation Manual - Page 76
Cuing Up to Shot Marks, Erasing shot marks from the tape, Cuing up to a selected shot mark
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
6-3 Shot Mark Operations Chapter 6 Shot Mark Function To delete an individual shot mark Use the following procedure. Z 3 21 1 With the shot mark list displayed, select the shot mark to be deleted using the MULTI CONTROL knob. 2 Hold the MARK button down. While you hold down the button, an "X" appears after the selected shot mark number, indicating that it will be deleted. To delete more than one shot mark, while holding down the MARK button turn the MULTI CONTROL knob to select all of the shot marks. 3 With the MARK button held down, press the DELETE button. This deletes the shot marks which were marked by an "X". To delete the entire list Hold down the DELETE button and press the LIST button. This deletes all shot marks from the list. This does not erase marks from the tape. 1 With no shot mark list displayed, hold the MARK button down for at least 2 seconds. The REC/ERASE indicator lights, indicating that you can rewrite or erase shot marks. 2 Display the shot mark list. 3 Turn the MULTI CONTROL knob to select on the list the shot mark you wish to erase. 4 Press the DELETE button and MARK button simultaneously. During the erasure process the message "ERASE SHOT MARK" appears, and the REC/ERASE indicator flashes. 5 When the shot mark has been erased, close the shot mark list. 6 Hold down the MARK button for at least 2 seconds, to turn off the REC/ERASE indicator. 6-3-4 Cuing Up to Shot Marks Cuing up to a selected shot mark Use the following procedure. Z Erasing shot marks from the tape To erase a shot mark, use the following procedure. Note Once you erase a shot mark from the tape, it cannot be read back in. 6-6 Chapter 6 Shot Mark Function MARK button 2 1 F FWD button REW button 1 Turn the MULTI CONTROL knob to select the desired shot mark from the shot mark list. 2 Press the PREROLL button.