Sony HDWM2000/20 Operation Manual - Page 86
To add and delete clips, To set time code data, To add clips, To delete clips
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
7-3 Tele-File Menu To add and delete clips To add clips 1 Rotate the MULTI CONTROL knob to move the "*" cursor to the position where you want to insert the clip. 2 Press the F2 (SELECT) button. The unit enters clip data modification mode. 3 Press the F5 (INS LN) button. A confirmation message "INSERT CLIP OK?" appears. 4 Press the F2 (OK) button. The clip is added at the position to which you moved the cursor in step 1. To delete clips 1 Select the clip to delete. 2 Press the F2 (SELECT) button. The unit enters clip data modification mode. 3 Press the F4 (DEL LN) button. A confirmation message "DELETE THIS CLIP OK?" appears. 4 Press the F2 (OK) button. The clip selected in step 1 is deleted. To set time code data Proceed as follows to make or change settings for cue point, IN point, and OUT point data. 1 Select a clip. 2 Select cue point, IN point, or OUT point. 3 Press the F2 (SELECT) button. The unit enters clip data modification mode. 4 Press the F2 (MODIFY) button. The two most significant digits begin to flash, and the data can be set or modified. 5 Press the F3 (T) or F4 (t) button until the digit that you want to set starts flashing. 6 Rotate the MULTI CONTROL knob to make the setting. To display the offset from the previous setting value The offset is displayed as long as you hold down the F2 (OFFSET) button. 7 Repeat steps 5 and 6 until you have set all the required digits. 8 Press the F5 (SET) button. The setting is confirmed and the unit returns to clip data display mode. To cancel the setting or modification and return to clip data display mode Press the F1 (CANCEL) button. Chapter 7 Tele-File 7-8 Chapter 7 Tele-File