Sony HDWM2000/20 Operation Manual - Page 135

Chapter 10

Setup Menus

Chapter 10

Setup Menus

10-31

Item number

Item name

Settings

(Continued)

Menu items in the range 900 to 999, relating to digital processing (continued)

917

ACTIVE LINE 1080

CONVERT MODE

(Valid only in 59.94i or

29.97PsF mode)

Select the conversion mode for the number of active scan lines.

conv :

Convert the active scan lines from 1035 to 1080, without changing the

aspect ratio.

panel:

Convert the active scan lines from 1035 to 1080. Insert the 1035 lines into

1080 lines, then compress horizontally.

Note

This item is valid only when menu item 018 is set to 1080.

934

CROSS COLOR (DC)

(Invalid in 24PsF or

23.98PsF mode)

Carry out the down-converter cross color adjustment.

0 to

8

to 15

930

DOWN CONVERTER

MODE


23.98PsF mode)

Select the down-converter mode.

crop :

Select the edge-crop mode.

l-box:

Select the letter box mode.

squez:

Select the squeeze mode.

931

DOWN CONVERTER

LETTER BOX MODE


23.98PsF mode)

Select the aspect ratio of the down-converter output when menu item 930 is set to

l-box.

16:9 :

Set the aspect ratio of the HD-SD converter output to 16:9.

14:9:


13:9:


932

H CROP POSITION (DC)


23.98PsF mode)

Adjust the “H-crop” (the horizontal position when cropping in the edge crop mode)

of the up/down converter output when menu item 930 is set to crop.

–120 to

0

to 120

918

SLOW PROCESS MODE

Switch the filter for increasing the vertical resolution during slow-motion playback

on or off.

ON:

Increase the vertical resolution in slow-motion playback.

OFF :

Do not increase the vertical resolution in slow-motion playback.

Note

In the case of HDCAM tapes recorded in PsF mode, this item is invalid.

920

SD-SDI H-ANC

CONTORL


23.98PsF mode)

Select whether or not to add information to the SD output.

Sub-item

1

AUDIO 5CH-8CH

ON :

Add digital audio data channels 5 to 8.

OFF:

Do not add digital audio data channels 5 to 8.

2

ON :

Add RP188 time code data.

OFF:

Do not add RP188 time code data.

RP188 ATC

935

DETAIL GAIN (DC)


23.98PsF mode)

Carry out the down-converter image enhancer adjustment. Adjust the sharpness

of edge emphasis.

0 to

20H

to 7FH

936

LIMITER (DC)


23.98PsF mode)

Carry out the down-converter image enhancer adjustment.

Adjust the maximum detail level added to emphasize the original signal.

0 to

20H

to 3FH

937

CRISP THRESHOLD (DC)


23.98PsF mode)

Carry out the down-converter image enhancer adjustment. Set the threshold

amplitude at which low amplitude signals are not emphasized.

0

to FH

938

LEVEL DEPEND

THRESHOLD (DC)


23.98PsF mode)

Carry out the down-converter image enhancer adjustment. Set the luminance

range for edge enhancement.

0 to

8

to FH

Section	Page
Table of Contents	5
Chapter 1 Overview	7
1-1 Features	7
1-2 Example System Configuration	10
Chapter 2 Location and Function of Parts	11
2-1 Control Panels	11
2-1-1 Upper Control Panel	12
2-1-2 Lower Control Panel	13
2-1-3 Switch Panel	24
2-2 Connector Panel	25
Chapter 3 Preparations	31
3-1 Connections to External Devices	31
3-1-1 Connections to Digital Devices	31
3-2 Reference Sync Signals	32
3-2-1 Selecting Reference Signal Depending on Operational Status	32
3-2-2 Connecting Reference Signals	33
3-3 Setup	35
3-4 Superimposed Character Information	36
3-5 Cassettes	38
3-5-1 Cassette Types	38
3-5-2 Inserting and Ejecting Cassettes	38
3-5-3 Preventing Accidental Erasure of Recordings	39
3-6 Using a Memory Stick	40
3-6-1 Notes on Memory Stick	40
Chapter 4 Recording and Playback	43
4-1 Recording	43
4-1-1 Preparations for Recording	43
4-1-2 Recording Time Code and User Bit Values	44
4-1-3 Recording Procedure	46
4-2 Playback	47
4-2-1 Preparations for Playback	47
4-2-2 Playback Procedures	48
4-2-3 Dynamic Motion Control (DMC) Playback	52
Chapter 5 Editing	55
5-1 Automatic Editing	55
5-1-1 Overview	55
5-1-2 Switch and Menu Settings	56
5-1-3 Selecting the Editing Mode	57
5-1-4 Setting Edit Points	57
5-1-5 Modifying and Deleting Edit Points	60
5-1-6 Cue-up to Edit Points and Preroll	61
5-1-7 Preview	61
5-1-8 Carrying Out Automatic Editing	62
5-2 DMC Editing	65
5-2-1 Overview of DMC Editing	65
5-2-2 Carrying Out DMC Editing	66
5-3 Special Automatic Editing Methods	67
5-3-1 Quick Editing	67
5-3-2 Continuous Editing	67
5-3-3 Standalone Editing	68
5-3-4 Manual Editing	68
5-3-5 Preread Editing	68
Chapter 6 Shot Mark Function	71
6-1 Overview	71
6-2 Shot Mark Operation Menu	72
6-3 Shot Mark Operations	73
6-3-1 Reading Shot Marks	73
6-3-2 Writing Shot Marks	73
6-3-3 Shot Mark List Operations	74
6-3-4 Cuing Up to Shot Marks	76
6-3-5 Reading In Shot Data	77
6-3-6 Sorting Shot Marks	78
Chapter 7 Tele-File	79
7-1 Overview of Tele-File Functions	79
7-2 Opening the Tele-File Menu	80
7-3 Tele-File Menu	81
7-3-1 Clip Data Display	81
7-3-2 Preroll and Cue Up Using Clip Data	84
7-3-3 Modifying Clip Data	85
7-3-4 Undo/Resume Functions	88
7-3-5 Displaying and Modifying Attribute Data	89
Chapter 8 UMID Functions	91
8-1 Overview of UMID Functions	91
8-2 Recording UMIDs	92
8-3 UMID Output and Display	94
8-3-1 UMID Output Settings	94
8-3-2 UMID Display	94
Chapter 9 Function Menu	97
9-1 Overview	97
9-1-1 Function Menu Configuration	97
9-1-2 Using the Function Menu	98
9-2 Function Menu Item List	99
Chapter 10 Setup Menus	105
10-1 Setup Menu Configuration	105
10-2 Setup Menu Operations	106
10-3 Items in the Basic Setup Menu	111
10-4 Items in the Extended Setup Menu	114
Chapter 11 Maintenance and Inspection	139
11-1 Removing a Cassette When Tape Slack Occurs	139
11-2 Head Cleaning	139
11-3 Error Messages	140
11-4 Moisture Condensation	142
11-5 Regular Checks	143
11-5-1 Digital Hours Meter	143
11-5-2 Maintenance Timings	144
Appendix	145
Specifications	145

Sony HDWM2000/20 Operation Manual - Page 135

Item number, Settings, panel, to 15, l-box, squez, 120 to, to 120, to 7FH, H CROP POSITION DC

Page 135 highlights