Sony HDWM2000/20 Operation Manual - Page 97
Function Menu, 9-1 Overview, 9-1-1 Function Menu Configuration, Function Menu, Configuration
View all Sony HDWM2000/20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 9 Function Menu 9-1 Overview The function menu allows you to make frequently made settings, such as selection of input video signals and time code settings. 9-1-1 Function Menu Configuration The function menu consists of seven pages by factory default: the HOME page and six pages numbered 1 to 6. You can also display the HOME2 page by setting user-defined function keys. The following icons appear at the left edge of the menu display section to denote the current page. 1: HOME page 1: Page 1 2: Page 2 3: Page 3 4: Page 4 5: Page 5 6: Page 6 2: HOME 2 page Each page has a menu display section made up of an upper and lower part. The upper part displays the menu items (functions) in the page, and the lower part displays the menu item settings. The figure below shows the menu display section in the HOME page. Menu items (functions) HOME2 page (user-defined function keys) Up to six function keys can be defined (i.e. six functions can be assigned to the F1 to F6 buttons in the HOME2 page). You can select and define the following function keys: • Functions selected from the function menu items in the HOME page and menu pages 1 to 4 • Function key to display the setting for setup menu item 211 (REMOTE1 PORT) and to carry out the operation when the menu item setting is "panel". Note By factory default, no function keys are defined in the HOME2 page. It is not possible to display the HOME2 page unless you have defined at least one function key in that page. For details of defining user-defined function keys in the HOME2 page, refer to the Maintenance Manual Volume 1. Page 6 You can define up to six setup menu items (assign six setup menu items to the F1 to F6 buttons) and register them on page 6. Note There is nothing defined on page 6 when the unit is shipped from the factory. For more information about defining setup menu items for page 6, refer to the Maintenance Manual Volume 1. VID. IN PB/EE CONFI CTL/TC MENU TCGSET SDI EE DISABL TC HOME F1 F2 F3 F4 F5 F6 Settings (values) In the figure above, SDI (HD Serial Digital Interface signal) is selected as the setting for VID.IN (input video signal selection), the menu item for button F1. This manual refers to this as "F1 (VID.IN) in function menu HOME page is set to SDI." Chapter 9 Function Menu 9-1 Chapter 9 Function Menu