Sony HVRM35U Product Manual (HVR-M35U Operating Manuals) - Page 28
In the recording/EE mode, In the playback mode
View all Sony HVRM35U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 1 Overview Displaying Various Data The unit detects the audio mode as follows: In the playback mode: Detects the audio mode recorded on the tape. In the recording/EE mode: Detects the selected audio mode in [AUDIO MODE] of the [AUDIO SET] menu. When the INPUT SELECT switch is set to HDV/ DV and HDV or DV signals are being input: Detects the audio mode of the signals being input. (The setting of [AUDIO MODE] in the [AUDIO SET] menu becomes invalid.) Audio mode: 2-channel (48 kHz, 16 bits in DV mode) When the AGC (Auto Gain Control) of a pair of channels is linked, this symbol is placed between the channels. In the EE mode, if [AGC CH1,2] in the [AUDIO SET] menu is set to [LINKED] and the AUDIO INPUT switch is set to AUTO, channels 1 and 2 can be linked for AGC operation and for stereo sound where channel 1 is set for the left sound and channel 2 is set for the right sound. In the EE mode, when [AGC CH3,4] in the [AUDIO SET] menu is set to [LINKED] and the AUDIO INPUT switch is set to AUTO, channels 3 and 4 can be linked for AGC operation and for stereo sound where channel 3 is set for the left sound and channel 4 is set for the right sound. (The levels of two channels, channels 1 and 2, are displayed.) Audio mode: 4-channel (32 kHz, 12 bits in DV mode) (The levels of four channels, channels 1 to 4, are displayed. When the unit is in the audio dubbing mode, the levels of playback sound are displayed on CH1 and CH2. The levels of input sound to be dubbed are displayed on CH3 and CH4. To check only the sound to be dubbed before dubbing, press the AUDIO DUB button while the unit is in the stop mode. Only the level meters of the channels to be dubbed (channels 3 and 4) fluctuate. Note When the INPUT SELECT switch is set to HDV/DV, the AGC does not function and channels are not linked. Also, link symbols do not appear. OUTPUT screen The OUTPUT screen is displayed when STATUS CHECK screen is set to [OUTPUT]. You can confirm the following setting values: - [HDV/DV SEL] in the [IN/OUT REC] menu - [SDI/CMPNT], [DOWN CONVERT] and [DV WIDE CONV] of [VIDEO OUT] in the [IN/OUT REC] menu - [HDV t DV CONV], [DOWN CONVERT] and [DOWN CONV AU] of [i.LINK SET] in the [IN/ OUT REC] menu For details on OUTPUT settings, see "IN/OUT REC menu" on page 72. Note In EE, recording, or audio dubbing (only the channels used to dub) mode, if the input levels exceed 0 dB, portions of the meters turn red. During playback, while signals are input via the HDV/ DV jack, or when the AUDIO INPUT switch is set to AUTO, the level meters do not turn red. Link symbol OUTPUT 2/5 HDV/DV SEL : AUTO VIDEO OUT SDI/CMPNT : 1080i / 480i DOWN CONVERT: SQUEEZE DV WIDE CONV: SQUEEZE [ STATUS CHECK ] : END OUTPUT 3/5 i.LINK SET HDV DV CONV: OFF DOWN CONVERT: SQUEEZE DOWN CONV AU: CH1,CH2 [ STATUS CHECK ] : END Link symbol 28 Chapter 1 Overview