Sony HVRM35U Product Manual (HVR-M35U Operating Manuals) - Page 43

Chapter 2 Playback and Recording When you press the ASSIGN button to which PB ZOOM is assigned, magnification mode starts and you can adjust the magnification with the J/j button. When you press the EXEC button during magnification mode, the display switches to move mode and you can move the portion to zoom with the J/j/K/k button. To return to magnification mode, press the EXEC button again. To end PB ZOOM, press the ASSIGN button. For details on ASSIGN buttons, see "ASSIGN BTN" in the "OTHERS" menu on page 83. Auto Repeat (CUSTOM REPEAT) The unit can repeat playback of all or a part of a tape. When the following items on the tape are searched for, the unit rewinds the tape to its beginning and starts auto repeat playback automatically. - Index signals - A portion unrecorded - A portion recorded in a format set by other than [AUTO] in [HDV/DV SEL] in the [IN/OUT REC] menu - Tape end By setting up [CUSTOM REPEAT] in the [VTR SET] menu, you can customize the repeat times, the repeat cycle, and the start time of repeat playbacks. To set the CUSTOM REPEAT Set the following sub menus of [CUSTOM REPEAT] in the [VTR SET] menu. REPEAT TIMES ON/OFF : Selects either to enable or to disable REPEAT TIMES setting. TIMES : Sets the number of times to repeat playback. Repeat times can be set from 1 to 99 times. Set the number of repeat times by pressing the J/j buttons on the unit. REPEAT TIMES [ MENU] : END TIMES 45 Press the EXEC button to complete the operation. REPEAT CYCLE ON/OFF : Selects either to enable or disable the REPEAT CYCLE setting. CYCLE : Sets the time of intervals for playback. The time of repeat interval is equal to the total time of tape in playback, rewind, and stop. Repeat intervals can be selected from 15 minutes to 300 minutes with 5 minute increments. Set the desired number by pressing the J/j button on the unit. REPEAT CYCLE [ MENU] : END CYCLE 60min Press the EXEC button to complete the operation. START TIME ON/OFF : Selects either to enable or disable [START TIME]. TIME : Sets the start time of [CUSTOM REPEAT]. You can adjust the start time of [CUSTOM REPEAT]. Set the number for the hour and minute by pressing the J/j button on the unit. Press the EXEC button after the hour is set, then adjust the minute. START TIME [MENU] : END TIME 12 : 30AM Press the EXEC button to complete the operation. To play back at a pre-set START TIME, rewind the tape beforehand. If the tape is not rewound, the unit rewinds the tape to its beginning at the selected START TIME, then start playback. Note While the unit is in standby mode, even when the START TIME setting is applied and the start time comes, the unit will not power on automatically. For details on "CUSTOM REPEAT," see page 80. Also, refer to "TIMER switch" (page 7), "STATUS CHECK screen" (page 27), and "CUSTOM REPEAT screen" (page 29). 43 Chapter 2 Playback and Recording