Sony HVRM35U Product Manual (HVR-M35U Operating Manuals) - Page 87
Power sources, Cassette tapes, Symptom, Cause/Remedy
View all Sony HVRM35U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Symptom Whenever you connect the unit to an AC outlet, the unit turns on automatically. No picture on the LCD monitor. When you select an item in [VCR PROFILE] of the [OTHERS] menu, "---ERROR!---" is displayed on the right of the profile list. Also, the item which "---ERROR!---" is displayed cannot be selected when you select [LOAD] or [PROFILE NAME]. Cause/Remedy • [AC ON MODE] in the [OTHERS] menu is set to [ON]. t Set [AC ON MODE] to [STANDBY]. • There is a cassette inside the unit and the TIMER switch is set to REPEAT or REC. t Set the TIMER switch to OFF. • [LCD BLACK] in the [DISPLAY SET] menu is set to [ON]. t Set it to [OFF]. • With an analog connection, the current setting of [60i/50i SEL] in the [OTHERS] menu is not appropriate. t Set it to the appropriate position for the device you are using. • The Profile data is damaged because the unit was turned off while saving the menu profile or renaming a menu profile. t Overwrite the profile with the error indication, or make a new profile after deleting the profile with the error indication. (You can eliminate the error indication but cannot read the setting values of the profile after an error indication appears.) Power sources Symptom The power cannot be turned on. The unit will not operate even if the power has been turned on. Cause/Remedy • The AC power cord is disconnected. t Connect the AC power cord. • The KEY INH switch is set to ON. t Set the switch to OFF. • The POWER switch on the rear of the unit is in the "a" position (OFF). t Press the "|" marked side of the POWER switch (ON). • The KEY INH switch is set to ON. t Set the switch to OFF. • Moisture condensation has occurred (page 97). • The cassette is not inserted straight. t Eject and reinsert it correctly. t Disconnect the power supply and then reconnect it after about 1 minute. If the unit does not operate even after you reconnect the power, use a sharp-tipped ballpoint pen or similar tool to press the RESET button. When you press the RESET button, all settings, including the date, time, and 60i/50i are initialized. Cassette tapes Symptom The cassette cannot be inserted. It takes time to eject the cassette. Cause/Remedy • There is moisture condensation on the head drum (page 97). t With the unit powered on, wait more than one hour. • The cassette is not inserted straight. t Eject and reinsert it correctly. • Another cassette has been loaded already. t Remove the cassette and insert the one you want to load. • This is not a malfunction. t The unit ejects the cassette slowly to protect the tape. While the cassette is being ejected, the q (cassette) indicator blinks. Chapter 6 Maintenance (Continued) 87 Chapter 6 Maintenance