Sony HVRM35U Product Manual (HVR-M35U Operating Manuals) - Page 73
Sdi/cmpnt, Down Convert, Squeeze, Letter Box, Edge Crop, Dv Wide Conv, Sd-sdi Set, Video Index
View all Sony HVRM35U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 5 Adjusting and Setting Through Menus Icon/Menu IN/OUT REC Submenu VIDEO OUT Setting Selects the mode of the video output jacks. SDI/CMPNT Selects the output format from the HD/SD SDI OUT jack and COMPONENT OUT jacks. Select from [480i], [480p/480i], [1080i/480i], or [720p/480i] when [60i/50i SEL] in the [OTHERS] menu is set to [60i]. Select from [576i], [576p/576i], [1080i/576i], or [720p/576i] when [60i/50i SEL] in the [OTHERS] menu is set to [50i]. DOWN CONVERT Selects the setting for down converting images output from the HD/SD SDI OUT jack, COMPONENT OUT jacks and analog video jacks when playing back HDV format or inputting HDV signals from the HDV/DV jack. BSQUEEZE : Maintains the image vertically and horizontally by compressing the horizontal ratio. Images appear vertically long. LETTER BOX : Maintains the aspect ratio of the image by compressing the image vertically. EDGE CROP : Maintains the original image size and crops the left and right edges of the images. DV WIDE CONV When signals are output from the HD/SD SDI OUT jack, COMPONENT OUT jacks and analog video jacks, selects the setting for converting the aspect ratio of a video recorded in DV-WIDE mode. BSQUEEZE : Maintains the image vertically and horizontally by compressing the horizontal ratio. Images appear vertically long. LETTER BOX : Maintains the aspect ratio of the image by compressing the image vertically. EDGE CROP : Maintains the original image size and crops the left and right edges of the images. SD-SDI SET VIDEO INDEX Sets whether to overlap the aspect ratio and signal-format of SD wide signal with VIDEO INDEX or not. BON: VIDEO INDEX is overlapped. OFF: VIDEO INDEX is not overlapped. RP188 ATC Sets whether to overlap the RP 188 ATC (Ancillary Time Code) with SD-SDI output data or not. BON: RP188 ATC overlaps. OFF: RP188 ATC does not overlap. VICT LNSEL Selects a line in the vertical blanking interval (VBI) of 50i SD signals to use to insert the VITC signal. 9th to 22nd line (B19th line) VICT LNSEL Selects a line in the vertical blanking interval (VBI) of 60i SD signals to use to insert the VITC signal. 12th to 20th line (B16th line) Notes • Regardless of the playback tape or of the format input to the HDV/DV jack, the selectable setting values displayed on this menu vary depending on the setting of [60i/50i SEL]. • WSS (Wide Screen Signaling) is not output when the picture is output to the COMPONENT OUT jacks in 480p or 576p. Set the monitor according to the down convert format of the picture that is output from the unit. • When you play back a tape in DVCAM (DV) format while an EE picture in NTSC/PAL is displayed, either the 480i resolution or the 576i resolution is output, regardless of the setting of [SDI/CMPNT]. • When [480p/480i] or [576p/576i] is selected in [SDI/CMPNT], 480p or 576p signals are output only from the COMPONENT OUT jacks, but not from the HD/SD SDI OUT jack. (Continued) 73 Chapter 5 Adjusting and Setting Through Menus