Sony HVRM35U Product Manual (HVR-M35U Operating Manuals) - Page 78

Operating Menus Chapter 5 Adjusting and Setting Through Menus Icon/Menu DISPLAY SET Submenu Setting MARKER BURN (page 46) Selects whether to output MARKER BURN or not. BOFF : Does not output MARKER BURN. ON : Outputs MARKER BURN. Note There are some limitations to the output of MARKER BURN. For details, see page 46. ALLSCAN MODE Zooms out the image on the LCD monitor to check the area surrounding the picture frame where the external monitor can not display. BOFF : Disables the ALLSCAN MODE. ON : Enables the ALLSCAN MODE. Notes • ALLSCAN MODE is for HDV format only. ALLSCAN MODE does not activate when DVCAM and DV(SP)-formatted tapes are played. • If formats are mixed on a tape, the part where the format has changed on a tape causes distortion of images. • When [ON] is selected and the output level of COMPONENT OUT is set to 480i, 576i, 480p/480i, or 576p/576i, output images from the S VIDEO OUT jack and VIDEO OUT jack are down converted to letter box. For details, see page 91. • Once the unit turns off, the setting of [ALLSCAN MODE] is set to [OFF] automatically. • When you set [MARKER BURN] and [ALLSCAN MODE] in the [DISPLAY SET] menu to [ON] at the same time, the marker will not appear in the correct position on the LCD monitor. This is not a malfunction. The marker will be output correctly via each video jack. DATA CODE Selects whether or not to display the data codes on the analog video output. (page 40) BOFF : Does not display the data codes. DATE : Displays the date and time when recorded. LETTER SIZE Selects the character size of the menu at the cursor. BNORMAL : Normal size 2 ×: Double height size DATE DISPLAY Selects the date display in the data code display. Y/M/D : Displays YY/MM/DD (year/month/day). M/D/Y : Displays MM/DD/YY (month/day/year). (Default setting for the HVR-M35U/M35N.) D/M/Y : Displays DD/MM/YY (day/month/year). (Default setting for the HVR-M35E/M35P.) TIME DISPLAY Selects the time display in the data code display. 12H : Displays 12-hour time. (Default setting for 60i as the factory setting.) 24H : Displays 24-hour time. (Default setting for 50i as the factory setting.) REMAINING BAUTO : (page 26) ON : The remaining tape time is displayed for 8 seconds under the following conditions. - If the remaining tape time is determined when you turn on power while a cassette is loaded in the unit. - When you press the PLAY button. Always displays under the following conditions. - Fast forward, rewind - Fast forward during playback, rewind during playback Always displays the remaining tape time. LCD BRIGHT Adjusts the LCD monitor brightness. Press the J/j buttons and the EXEC button to adjust the brightness. (The mark under the bar indicates the factory setting value.) LCD COLOR Adjusts the color density of the LCD monitor. Press the J/j buttons and the EXEC button to adjust the brightness. (The mark under the bar indicates the factory setting value.) LCD BLACK Mutes the images on the LCD monitor and displays only the text data. BOFF : Does not mute the images ON : Mutes the images Note When [ON] is selected, the images output from the rear panel to the external monitor are not muted. 78 Chapter 5 Adjusting and Setting Through Menus